Question about Mercedes CR2 Emulator

[TeiS]

Hi, i installed a immo emulator for a ML270 with WPS (CR2.14 ECU).
I Installed 12V ACC, GND, CAN-H and CAN-L and modified the ST95P08 Address 1D0 to 1D4 with 02 02 00 FF FF.


I read in the manual that when the red lighting the emulator working correctly but in bench, the led do not light.


The led only light in the car ??


And other question, need remove the WPS CAN wires??




Thanks for help me :)

[mercis]

you must remove immo can

[TeiS]

you must remove immo can
And you know when the red light on?

[okura]

program new key

[electrones]

And you know when the red light on?

Hi friend

you need cut "Can line" before connect the ECU.
Take a look here on PDF, if your immo is on EAM you need cut green and white wire on connecter 3"EAM" "A2,A3"
Confirm wiring diagram on WIS if you have before, okk

PDF:https://carlabimmo.com/shop/index.php?controller=attachment&id_attachment=73

Good luck.
Cheers