bMW E 46 DME SWAP

[Tzepy]

266628266629 ECU IS BOSCH 0261204420 dme1 430 186 I REPLACE ECU WHIT ONOTHER IDENTICAL AND Y TRY TO SYNCRONISE WHIT PA SOFT BUT NO SUCCES , CAR CRANKS AND START 1 SECOND ,PLEASE HEALP ME SYNC FILES

[Tzepy]

Anyoane pls

[Tzepy]

or isn for the file because i whant to use un emulator

[kops]

YOUR ISN 251A

[Tzepy]

dosent work whit that isn, start 1 sec whit immo emulator then stops

[koncimobil]

try this dump to start the cars:

[Tzepy]

thaks , y will try and report

[Tzepy]

"DMW-EWS3.3 interface"is the only error y have on engine

[koncimobil]

try again realign dme-ews

[Tzepy]

i try it whit pa soft but i cant , i got an error when y try to realign dme whit ews

[Tzepy]

i try whit inpa but the same problem and i cant read the isn code

[koncimobil]

inpa can't read isn bms46.
use gt1 to resynd ews-dme.
done.

[Tzepy]

no succes the same problem , car start and stops , only error dme-ews aligment

[bram380]

Use this dump then adaptation with gt1/inpa:

[Tzepy]

thanks a milion cars starts and works after adaptation no erors, evreythyng perfect but after 5 minutes if the car stais whithout ignition the car dosent starts again, after readapting car starts but the same after 5 minutes

[bram380]

Such problems are often due to weak signal transponder key.
Try to create a new transponder key.

[Tzepy]

i have no erors on ews related whit the key, the car cranks when the engine not starts

[bram380]

i have no erors on ews related whit the key, the car cranks when the engine not starts
Looks like car had other problems.
Please check more thoroughly with diagnostics.

Or the easiest way you change ecu and ews.

[Tzepy]

the car works, i put the 29f200 in write protection mode and the car runs fine

[deondti]

I have a BMW E46 320i

I need to replace the engine ecu
5WK90015 index 08
DME MS43
(original ecu dump corrupt)

I have attached original EWS dump and new DME 29f400 dump

Could someone please make them a set for me.

I would greatly appreciate it

I thank you in advance

[deondti]

I have a BMW E46 320i

I need to replace the engine ecu
5WK90015 index 08
DME MS43
(original ecu dump corrupt)

I have attached original EWS dump and new DME 29f400 dump

Could someone please make them a set for me.

I would greatly appreciate it

I thank you in advance

Anyone???

Even maybe another dump set and I can make new keys...

[bram380]

Try this dump: