PDA

View Full Version : Renault Clio immo is off, car doesnt start - EMS 3132 - S110140201A



joe1953
4th July, 2014, 09:35 AM
Hello friend,

i have a problem with a renault clio year 2011.
In car is a ems3132 ECU and car doesnt start.

I made ecu immo off and cutted pin 58.
After make car immo off i made diagnostic on table and got the result that immo is inaktiv. NO IMMO.

I connected ecu back to car but car doesnt start.

What could be the problem ???

266983266984

Thanks

Shmortz
4th July, 2014, 06:08 PM
do you have any rpm in live data when cranking engine?
...if not replace rpm sensor!

joe1953
8th July, 2014, 12:11 AM
Hello schmortz,
could you please rewrite your question.
i not understand realy what you mean.

Thanks

diagprog
8th July, 2014, 12:39 AM
Hello schmortz,
could you please rewrite your question.
i not understand realy what you mean.

Thanks

That is to say you have to check the sensor crank-shaft.

You must make diagnose and look at the live data of crankshaft.

metercar
8th July, 2014, 12:40 AM
If in measuring data live is RPM up with starter run

but i think ems3132 do not rpm if this is locked with immo

2xded
8th July, 2014, 05:19 AM
Yes, ems3132 do not rpm if this is locked with immo.
Which indicates diagnosis of immobilized activity?