Audi A3 2011 Mileage help

[super jumbe]

Audi A3 2.00LT TDi 2011
Need to know the chip for reading mileage.
I can see one 24c32 if I read and post the dump is it possible?
Thanks in advance.

[garagetech]

No not possible you also need microns dump , chip is protected

[super jumbe]

Which one is a microns chip? Is this the chip with mileage and pin code in it?

Appreciate any advice mate.

[chrismoore02]

Needs to be done obd digiprog 3 should do it

[garagetech]

Needs to be done obd digiprog 3 should do it

Also abritus will do it

[garagetech]

Which one is a microns chip? Is this the chip with mileage and pin code in it?

Appreciate any advice mate.

This chip is secured just eeprom cant do it its combined secured with micronas mate, time for investment or get someone who has the kit

[super jumbe]

Thanks for your advice, how do I get pin code from dash which chip?

[garagetech]

Thanks for your advice, how do I get pin code from dash which chip?

May i ask why need pin code for mileage

[super jumbe]

I am replacing a fancy 2009 dash to 2011 car and when I fitted the new dash it shoes the mileage but the car will not start, I thought by changing eeprom I may able to start the car and get the original mileage, in order to programme new dash I need the pin code, unless there is another solution please help.

[garagetech]

Adapting this cluster with pin is impossible they have changed this since 2004 onwards it was possible in old clocks not any longer, you cant just change eeprom over in these clocks cause security in embedded far beyond the serial eeprom in the flash , so best bet get abritus avdi cheers good luck

[Meat-Head]

On topic

can you immo off and stuff key light



? V v v

can the dealer do it?

[super jumbe]

On topic

can you immo off and stuff key light



? V v v

can the dealer do it?

Dealer noooo cost me leg and a arm no thank you, I will keep digging tel I get oil!!!

[Meat-Head]

Ring dealer might be like ?45 worth a call

[super jumbe]

When I fit original dash car starts no problem, this was just for experimental way I wanted to fit a new fancy dash I have come to agree I have given up on this matter and will rest now.
Thanks pall for all your advice and help.

[Meat-Head]

What about just changing the face and pointers

[lupu_sandu]

If you have xprogM this will be a easy task ;)
Just read and poste here eeprom+Micronas from both dash.

[Meat-Head]

Microns with xprog - how - asking on sj behalf

[garagetech]

Microns with xprog - how - asking on sj behalf

267325

Dont try it with clone xprog killed many before you could be lucky not to.

[lupu_sandu]

You just need to read micronas and eeprom, so China xprogM will work.

[Diagi]

267325

Dont try it with clone xprog killed many before you could be lucky not to.

This picture shows not the correct connection in Audi Micronas, it is for Volkswagen/Seat Micronas clusters. In Audis CDC3217 you do not have to disconnect PINs from PCB.

And it is working also with good clone.

[garagetech]

This picture shows not the correct connection in Audi Micronas, it is for Volkswagen/Seat Micronas clusters. In Audis CDC3217 you do not have to disconnect PINs from PCB.

And it is working also with good clone.

I think you know what you're on about please post correct picture i would appreciate not disconnecting pins

Cheers

[gabes]

Can anyone give me help pin and cs from Micronas + 24c32?

Thanks.

271259
271260

[totalkey]

here you go