softcam keys - help please..

[satlover276]

Hi everyone.. i would be very grateful if someone could send me a PM how to add the softcam keys file to usr/keys. I am not that experienced and although i've managed to get quite a lot done reading up on here i've just struggled to find an easy guide on what i should be doing. The channels i'm looking for are the Digea TV package on 3.1e. I should say that i've installed ******** 1.38. It really would be very helpful if anyone was able to help me. Thanks..

[P&D]

This might help

http://www.digital-kaos.co.uk/forums/f186/black-hole-1-7-6-cccam-287037/#post1662371

If not Google is a wonderful tool

[digicon]

Hi satlover276,

Find below latest softcam keys for Linux E2 receiver.

Extract from zip file and then connect to your receiver either with DCC or VUCC and navigate to folder /usr and then to folder /keys and replace files inside there with the files extracted from the softcam folder

Restart the Cam and your good to Go.

Many Thanks to @informed? for the Keys

[satlover276]

Hi digicon, i've done as you advised.. downloaded the file, 'extract here' which leaves me with a yellow file/folder and i've placed that into the usr/keys folder but then absolutely nothing. I've changed the from 1.38 to 1.35 just in case but still nothing opens.. for such a simple procedure i'm just finding it a struggle assuming what i'm doing is right.

[digicon]

dont place the File/Folder into /usr/keys you transfer over what is inside the File/folder into /usr/keys

[satlover276]

i've tried that digicon and although i'm getting 'emu' on the infor bar above the current programme of the channel nothing opens. If i go into the softcam setup/restart i can see the details of the channel displayed: system: BISS, caid, pid. prov, cw0, cw1, signature: ok, source: emu and the date/time.

Really confused whaere i've gone wrrong. I added the files in with the others that were inside the keys folder, the files already there were the following: ignore.list, ignore.list example, mg_cfg, mg_example, newcam.list example, peer.cfg,peer.cfg example, priority.list, priority.list example, replace.list, replace.list example. Do i have to remove any of these files before i add the new ones over?

[P&D]

The new file should overwrite the old files ( & ask you if you want to do this)( just click yes)

May be add more cam's to the box
to open the channels

I have 1.38 - C*m 2.14 - Sc*m360 & Osc*m most channels open

*=A
Hope this help's

Sorry i cannot link these it's against the rules but they are easy to find

[satlover276]

i've loaded mgcamd 1.35 and after following the instructions above i still haven't succeeded in getting any of the channels to open. I'm wondering whether the keys added are the correct ones for the 3.1e satellite channels.. it's all very frustrating.

[digicon]

Keys are 100% working on 1.38 have you tried a rescan on 3.1? east as with the new satellite Eutelsat 3B just gone up the Greek channels are now higher up the frequency range try scanning these:

12519 V 13960 3/5
12537 V 13960 3/5
12548 H 13960 3/5
12568 H 13960 3/5

[satlover276]

ok, let me try that and i hope it works.

[satlover276]

all sorted now with digicon's help.