Key data Daihatsu Cuore

[malczykos]

Hi.

My friend have lost key situation. Daihatsu Cuore.

In atachement is dump from immo box 93C66.

Pls help generate key data.


267815

[iamfooser]

Here you go. Try this reset dump.

Just insert key to register.

[malczykos]

Hi. My friend try this dump, but without succes.

Hi try instert keys with ID67 chip PG1: 32 and 52. But immo led still blinking and nothing change in eprom.

Mayby samone can write in to dump his chips or immo off?

In atachement is dump of ECU.268583268583

[gwee]

Hi. My friend try this dump, but without succes.

Hi try instert keys with ID67 chip PG1: 32 and 52. But immo led still blinking and nothing change in eprom.

Mayby samone can write in to dump his chips or immo off?

In atachement is dump of ECU.268583268583

post key data pg1 2 3, will add to dump

[malczykos]

In atachement is key data.

[gwee]

In atachement is key data.

try this, should start :)

[malczykos]

Problem resolved.
1. Write to eprom reset dump form #2 post.
2. Make 2 transponders of this data:

id 67 key 1 master
P1: 52
P2: 4E
P3: C3 98 0B 04
P4: A7 0D B0 E6 8B

id 67 key 2
P1: 52
P2: 2E
P3: DF 26 BD 16
P4: 3B 5D FC B3 3B

3. Cycle ignition both transponders
4. Engine should run.

[philipcoin]

hello m8,
please did you get your car running?
cos i have simlilar problem mine start and dies,is daihatsu move.
please any help will be much appreciated.


thank you.

[Amiramzah]

Hello.
Thank for approval admin.

[Alpaholic]

I have the same problem. Cuore 2004 AKL ID67. Can not make a key with this dump. Immo always blinking.i

Can somebody help?
Do somebody have this reset dump from post 2?

[Anachem]

I have the same problem. Cuore 2004 AKL ID67. Can not make a key with this dump. Immo always blinking.i

Can somebody help?
Do somebody have this reset dump from post 2?



It is reset file. Try and report back pass in pm.
Cycle the ignition.

[Alpaholic]

Thanks Anachem, will try it.

[Alpaholic]

Problem resolved.
1. Write to eprom reset dump form #2 post.
2. Make 2 transponders of this data:

id 67 key 1 master
P1: 52
P2: 4E
P3: C3 98 0B 04
P4: A7 0D B0 E6 8B

id 67 key 2
P1: 52
P2: 2E
P3: DF 26 BD 16
P4: 3B 5D FC B3 3B

3. Cycle ignition both transponders
4. Engine should run.


Ok, prepared the two chips, made a reset dump. And now?

What means cycle in? Turn one key inside, then to ignition on? How many seconds?
After that, whats with the next key?

[Alpaholic]

Put 4 and 13 together?