View Full Version : Please calculate opel CIM pin :)
andrius
10th July, 2014, 10:06 AM
Hi, i have an opel, need for pin code, to calibrate stearing angle sensor:) maybe someone could calculate it for me? many thanks :)
267892
Bllinda
10th July, 2014, 10:13 AM
Where there is no need to techx pin code.
andrius
10th July, 2014, 10:15 AM
? :) i have tried stearing angle adaptation with opcom, it ask me for pin :) for similar cars i enter pin and do adaptation :)
TPS
10th July, 2014, 11:06 AM
PIN must be 1943
regards
andrius
10th July, 2014, 12:52 PM
1943 no accepted by control unit :)
kreepyme
10th July, 2014, 01:05 PM
Dude, you need to read dump from immo box. Must be an TMS370.
Upload the TMS dump here and I`ll give you the code.
TPS
10th July, 2014, 01:37 PM
this system use CIM module not immobox
regards
andrius
10th July, 2014, 02:17 PM
pin is in CIM, Dash and PSG16 only in this ystem :) as radio is missing :)
PremierD
10th July, 2014, 02:51 PM
2112 mate ........................:)
andrius
12th July, 2014, 07:28 PM
did not do the job. will try to pull it out with AVDI from PSG16 :) many thanks to all :)
PremierD
12th July, 2014, 07:32 PM
http://www.digital-kaos.co.uk/forums/f178/psg16-pin-code-help-407390/
check ascII... :)
cndv
13th July, 2014, 11:32 PM
pin from cim is 1943
100% sure gud lock :beer:
check measuring blocks because it can be locked at any time by entering the wrong pin
aceton
14th July, 2014, 08:56 AM
1943 100% correct
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.