Scenic II 1.9 dCi DTC disable

[omglol]

Can anyone disable fault code DF1070 on Renault Scenic II, 1.9 dCi 120 HP, my 2004?

This is known software problem - the ECU throws code DF1070 cold loop fault (or something like that) and the air conditioning stops to work, although it does not have any defects (checked by myself). Clear the code and - presto!, A/C is working again.

Also, I believe the DF1070 fault code does not have OBD Pxxx alternative code, so ... is there any option to remove it? Thanks!

[gttuning]

Can anyone disable fault code DF1070 on Renault Scenic II, 1.9 dCi 120 HP, my 2004?

This is known software problem - the ECU throws code DF1070 cold loop fault (or something like that) and the air conditioning stops to work, although it does not have any defects (checked by myself). Clear the code and - presto!, A/C is working again.

Also, I believe the DF1070 fault code does not have OBD Pxxx alternative code, so ... is there any option to remove it? Thanks!
what ecu is in this car?

[omglol]

EDC16C3 it is.


Sent from my iPad using Tapatalk

[elmassioui]

poste your file

[omglol]

Here is a link to the file: https://www.dropbox.com/s/r6qlxouyxoxfhio/ori_edc16c3

If someone can disable DF1070 that would be great.

[Babos]

Swiftec dtc module can help you or manual solution.
Ask some one who can or have that sw or wait.

[elmassioui]

here your dtc disable
try and give answer

[Babos]

here your dtc disable
try and give answer

You are very good man!! you kill diagnostic for this car very good nice JOB!
He ask help and YOU help him?
If you want tested your solution say him what you do.
Best regards.

[omglol]

OK, can anyone please offer solution with only df1070 disabled? I really need this one. Thanks!


Sent from my iPad using Tapatalk

[GolfmkI]

OK, can anyone please offer solution with only df1070 disabled? I really need this one. Thanks!


Sent from my iPad using Tapatalk


You have error in Compressor,very common also in wiring nearby. when too much load ( Ecu calculate it)is detected , error is shown and Ecu disable the ac.
You only need Clip and a bit of time to check and solve problem.
Deactivate dtc is not professional

[elmassioui]

its work good.why u say killing diag ? see the map good plz

iphone Vs

[imcumen]

dtc df1070 to solve your problem
1)reprogramming the injection computer with Renault Clip + cd reprog
2)power plug of the compressor to replace
3)see if the compressor is not seized up
4)if you have an insufficient gas pressure prevents starting the compressor.

[omglol]

Compressor and wiring have been checked several times. Everything OK. Also new pressure sensor installed, but the fault just keeps coming back every few weeks.


Sent from my iPad using Tapatalk

[xdamdamx]

reprog with CLIP and check UPC module for a broken diode inside.

[omglol]

Reprog what with CLIP? And how?


Sent from my iPad using Tapatalk

[omglol]

its work good.why u say killing diag ? see the map good plz

iphone Vs

Not working. Customer came back today, CLIP showing DF1070 again ... :S

Can somebody remove 100% this fault code from flash? Thanks.

[Babos]

Not working. Customer came back today, CLIP showing DF1070 again ... :S

Can somebody remove 100% this fault code from flash? Thanks.

yes i can.

[omglol]

Still waiting for somebody who can help me out ...

[gttuning]

Still waiting for somebody who can help me out ...
do you need help with this still?

[omglol]

Yes, I do. Can you help me?


Sent from my iPad using Tapatalk

[gttuning]

try to scan this car and get obd code P0???.you can get this code if you scan the car with launchx431 by obd generic,not by manufacture.or some other scaner that can scan generic codes.i think clip can do that too.

[omglol]

That fault does not have Pxxx code equivalent, tested.


Sent from my iPad using Tapatalk

[Babos]

All codes have Pxxxx :)

[omglol]

Then tell me why OBD-II scanners don't find this fault code at all. Only Renault Clip shows it.

[boomeer]

All codes have Pxxxx :)
yes you are right my friend the p cod is P0534