PDA

View Full Version : Mercedes Vito 1037383382 dpf delete now no start



woodysjw
11th July, 2014, 10:37 PM
Hi have a Vito read ecu via obd deleted DPF corrected checksumm and flashed back

now vito doesnt crank i still have comms with ECU no fault codes stored

I have pulled full BDM can anyone check it or have an ori i can check incase my original read is at fault

Thanks

Woody

woodysjw
12th July, 2014, 08:15 AM
Does anyone have full bdm for this

woodysjw
12th July, 2014, 12:20 PM
Ok defo need ori to patch my bdm read back to working can anyone help

ominimicu
12th July, 2014, 12:32 PM
I can fix it if u givei initial OBD original read. and current BDm read

woodysjw
12th July, 2014, 02:07 PM
Thanks a million here they are

Fantomisback
12th July, 2014, 03:51 PM
Thanks a million here they are

u can try this bdm file write all

woodysjw
12th July, 2014, 03:54 PM
Ok will try it now will this retain my immo data

woodysjw
12th July, 2014, 05:35 PM
I get an error in rar file

Tes1a
12th July, 2014, 05:38 PM
i try your rar is ok

woodysjw
12th July, 2014, 05:53 PM
Yes sorted Rar flashed file still no go I read out flash after writing your file and it seems half the flash is empty

woodysjw
13th July, 2014, 10:34 AM
Still no start

Babos
13th July, 2014, 10:43 AM
Maybe you brocken ecu when open him?
Try take used ecu and write full and check.

woodysjw
13th July, 2014, 02:41 PM
I got van to crank started once but then won't start again like bad checksum I used a hex editor and copied my part obd read into my bdm read

woodysjw
14th July, 2014, 07:54 AM
Can anyone check this to see if its a full BDM read flash

Thanks