PDA

View Full Version : Mini Galletto european version problems



worldofchiptuning
13th July, 2014, 05:43 PM
hello friends,
have my mini galletto v53 of portugal that not start from 4 month

assistance is like a Chinese seller (non-existent)


Who can help me make it work again?


I attach the license read

thanks to all 268419

worldofchiptuning
14th July, 2014, 09:03 AM
who can help me ?
can change mcu but is no correct method

thx

morgano
14th July, 2014, 10:45 AM
where you bought it from? Name the seller and his fantastic support please.

I guess you only need a good ftdi file.

heteromies
14th July, 2014, 02:46 PM
What is your problem? Is this your first time to use tool or what is history? Tool are not registered or activated or what, understand nothing....

worldofchiptuning
16th July, 2014, 07:30 AM
buyed from Edro in Portugal
worked for 5 month
late 5 month not start software
rewrite license but is same problem

worldofchiptuning
16th July, 2014, 03:18 PM
checked for me ? thx

heteromies
16th July, 2014, 04:10 PM
I don't think so its license problem. Maybe need just remove software and installing again. Have you check in device manager is fgtech driver there? If not, update drivers(path c:\FGTech\fgtech_new_drivers...

Keep your lisence safe, if reinstalling.

youk
17th July, 2014, 03:30 PM
galletto 3 v54 mini work with the software chinesse v54
tool-386 only 100% tested

http://www.chinaautodiag.com/download/FG%20TECH%20V54.zip

worldofchiptuning
21st July, 2014, 01:31 PM
ok try now
will report if ok or not
thx

worldofchiptuning
21st July, 2014, 01:32 PM
and license ? i use license of china gal ?

youk
22nd July, 2014, 02:23 PM
no license and no dongle with this software

darwins
23rd July, 2014, 03:38 AM
Hello Dk

It took a long time to download :)

I loaded to fresh hd and it runs my euro clone. Not tried to read write yet but looks promising :)

I have a china unit which ran their V51. The software does open with this hardware but the menu is locked / greyed out.. Can anyone help with the project to turn this hardware into V54 ?

WBR

youk
23rd July, 2014, 08:36 AM
flash mcu lpc2119
i need dump for v53

worldofchiptuning
24th July, 2014, 02:44 PM
have try today, software start but i haven't the 12v
like i can resolve the problem ?

heteromies
24th July, 2014, 04:44 PM
have try today, software start but i haven't the 12v
like i can resolve the problem ?

Connect software/interface to the car OBD- plugin, then you can see what charge battery has. And when programming, should use external power supply for keeping battery voltage over 13V.

darwins
24th July, 2014, 04:58 PM
Hi worldofchiptuning

My euro fg tech is ok, but I have a China version which will open software but the menu is grayed out so tool can not be used, is this your problem ?

Does any one have FG Tech software and board project ? I believe the China clone can be made into euro easily but I don't want to pay $250 for this :)

WBR

worldofchiptuning
24th July, 2014, 10:08 PM
Connect software/interface to the car OBD- plugin, then you can see what charge battery has. And when programming, should use external power supply for keeping battery voltage over 13V.

yes have connect interface to the obd of car, problem infact is that external power no work in software

worldofchiptuning
24th July, 2014, 10:11 PM
Hi worldofchiptuning

My euro fg tech is ok, but I have a China version which will open software but the menu is grayed out so tool can not be used, is this your problem ?

Does any one have FG Tech software and board project ? I believe the China clone can be made into euro easily but I don't want to pay $250 for this :)

WBR

payed my mini galletto 500 eur
isn't china made
version was 53 and worked with seven and all ivenif change date

theghost
24th July, 2014, 10:45 PM
Maybe your mcu is dead-> soft will start but voltage will be zero

Edc17tricore
25th July, 2014, 10:05 AM
Hi worldofchiptuning

My euro fg tech is ok, but I have a China version which will open software but the menu is grayed out so tool can not be used, is this your problem ?

Does any one have FG Tech software and board project ? I believe the China clone can be made into euro easily but I don't want to pay $250 for this :)

WBR

2 Possibility:
- Mcu not recognized (bad programmed)
- You are using a wrong sw. If your tool have serial 0475 you must use chinese v53 sw, not work with v54 chinese sw (in this case you can select nothing)

darwins
26th July, 2014, 08:08 AM
Hi EDC17

The serial number for the China clone shows the same as my euro tool.

Is there a software tool like v53 to read and write v54 ?

WBR

worldofchiptuning
27th July, 2014, 01:57 AM
2 Possibility:
- Mcu not recognized (bad programmed)
- You are using a wrong sw. If your tool have serial 0475 you must use chinese v53 sw, not work with v54 chinese sw (in this case you can select nothing)

yes but where is sw free v53 with no dongle and no license ???
can you help me ?
problem that i haven t sw of my version, i lose it

thx

worldofchiptuning
28th July, 2014, 09:12 AM
friend do you have sw 53 ivenif need of license and dongle ?
thx

morgano
28th July, 2014, 12:35 PM
Seems you don't read your private messages, it's a pity.

worldofchiptuning
29th July, 2014, 10:02 AM
have see
question for darwin, your tool work also with seven OS ?

worldofchiptuning
31st July, 2014, 09:15 AM
my numbertool is 0358 or 0356

morgano
31st July, 2014, 08:24 PM
maybe 0386?

worldofchiptuning
8th September, 2014, 05:51 PM
i find sw v53 china version free
who help me ?
thx

worldofchiptuning
8th September, 2014, 08:59 PM
if i change mcu with an mcu of china gal v53 can work my mini gal ?

morgano
8th September, 2014, 11:52 PM
if i change mcu with an mcu of china gal v53 can work my mini gal ?

It should.