BMW 320D year 2004 euro 4 remap via obd fgtech galetto

[crackerx]

hello

i want to remap my 320d year 2004 euro 4 with fgtech galleto clone
i have succesfully read the ecu map, the ecu is ecd16c31
268834

is a risk to write the map with this tool?
i don`t want to damage the ecu because i don`t have a BDM dump backup and BDM tool wright now

many thanks

[Tes1a]

hello

i want to remap my 320d year 2004 euro 4 with fgtech galleto clone
i have succesfully read the ecu map, the ecu is ecd16c31
268834

is a risk to write the map with this tool?
i don`t want to damage the ecu because i don`t have a BDM dump backup and BDM tool wright now

many thanks


Buy BDM and always use BDM for edc16

best regars

[crackerx]

i will damage the ecu with my fgtech over obd?

i also write edc16c34 via obd and worked great

[Fantomisback]

i will damage the ecu with my fgtech over obd?

i also write edc16c34 via obd and worked great


always can go something wrong with obd writing so beter to use BDM or your galletto over BDM CONNECTOR

[betrescudan]

fgtech have function bdm...if read ok,then write ok

[crackerx]

yes but i don`t have BDM adapter

i have read OK from OBD and i hope to write OK throught OBD

the question is:
-if i will fail to write map via OBD and after that i will buy a BDM adapter and i will write the same file with BDM will work?or i need a full BDM backup?
(my dump that i have readed via OBD is the complete dump of the flash?)

[digi men]

You will need the full bdm file.

[ominimicu]

It will work OK...dont worry
U have 5% change of failing! even mpps does bmw edc16cxx over OBD jsut fine

[smt]

you need stable 14v

[daniel guerra]

Turn off all system that consume power, blower, radio, lights.

[elmassioui]

no dont try to write edc16 with galetto or mpps obd .you need to use fgtech2 bdm read/write good

[betrescudan]

no dont try to write edc16 with galetto or mpps obd .you need to use fgtech2 bdm read/write good....​oh....did you tryed?....mpps work on edc16---fgtech work on edc16...do you tryed?are u sure?if not ,why you post that?and for what using fgtech2?...can use BDM100 ...much better

[ecupro]

no dont try to write edc16 with galetto or mpps obd .you need to use fgtech2 bdm read/write good....​oh....did you tryed?....mpps work on edc16---fgtech work on edc16...do you tryed?are u sure?if not ,why you post that?and for what using fgtech2?...can use BDM100 ...much better

That's only scariing other, friend just relax, if is that your own car, if it be some fail or something, park the car on the side, buy bdm and easy repair, why is there a lot of panic for just writing one file which is sucesfful, cheap MPPS work this, why you think that fgtech2 can't.

[ominimicu]

But i did LOTS of them...dont see why things have to go bad...

[ecupro]

But i did LOTS of them...dont see why things have to go bad...

We tell him that this go ok, but know is his choice what to do, I tell him for me and all of us fgtech2 is better tool than MPPS, and I do this ecu with MPPS with obd with no problem.

[ominimicu]

yes of course Fgtech better, but jsut saying even MPPS did ok.
I personally offer to fix the ecu for FREE if nay problem occur. u can send me the ecu I ll BDM it and all.

[ecupro]

yes of course Fgtech better, but jsut saying even MPPS did ok.
I personally offer to fix the ecu for FREE if nay problem occur. u can send me the ecu I ll BDM it and all.

Great, now there is no reason to not write with obd. Just work.

[Morette]

It doesn't look good if it can't get the ID correctly.

[crackerx]

the ecu has been writed fine via obd with fgtech galetto 2
many thanks everyone