PDA

View Full Version : C16Cxx Flash Programming..



darwins
17th July, 2014, 08:41 PM
Hello DK

I'm looking for some opinions about boot flash programming ecu types with infineon C16Cxx

First question what is the best equipment out there genuine or clone ?

I have clone Piasini but todate never read or write flash in boot.

I have euro FG Tech V54 which does work for some variants but deffo not all that is listed. The strange thing is the tool does read various listed but many of these it will not write.

I have no problem removing any flash and reading writing. But now I'm becoming inquisitive about what should be possible.

WBR

b2s15
17th July, 2014, 09:29 PM
which car ? which engine ? which year ?

darwins
17th July, 2014, 09:47 PM
Hi

My findings cover various ecu variants and car models.

BMW

Siemens MS43 read only 100% Dataman match


Citroen Peugeot:

Sagem S2000PM no read or write


Renault:

Delphi TRW DDCR read only 100% Dataman match


Mercedes:

Siemens SIMKLE read only 100% Dataman match

I tried various adjustments in time etc at boot.

I'm wondering if my hardware has an issue especially in the ecu's I can read good but not write. Or maybe there is another option when writing which I'm missing.

jnoroeste
18th July, 2014, 05:06 PM
Hi

My findings cover various ecu variants and car models.

BMW

Siemens MS43 read only 100% Dataman match


Citroen Peugeot:

Sagem S2000PM no read or write


Renault:

Delphi TRW DDCR read only 100% Dataman match


Mercedes:

Siemens SIMKLE read only 100% Dataman match

I tried various adjustments in time etc at boot.

I'm wondering if my hardware has an issue especially in the ecu's I can read good but not write. Or maybe there is another option when writing which I'm missing.

M8, with that expectations... must go for genuine tools!! You will save your money.
From my experience Alientech tools are the best.
Regards.

morgano
18th July, 2014, 07:44 PM
Vag kkl cable with ft232 and nefmoto sw may be good cheap choice too.


Regards,

morgano
19th July, 2014, 04:12 PM
Vag kkl and gall1260 eeprom for ftdi and its sw works fine bootmode too.


Regards,

darwins
19th July, 2014, 11:22 PM
Hi Guys

I have no problem with a genuine tool.

Can anyone confirm boot reading of the above .... with which tool ?

WBR

Most of the equipment I have is genuine!

morgano
19th July, 2014, 11:31 PM
Mate, the solutions i told you are chinese clone cables vag kkl 409. The trick is the software to use.

darwins
20th July, 2014, 10:57 AM
Hi morgano

I have kkl and old galletto cable..
What software is it that works for boot reading the above?

The euro Fg Tech does deal with some of the common Bosch stuff but not the above even though they are listed.

WBR

milanocito
20th July, 2014, 11:10 AM
morgano can u explain ....?

darwins
20th July, 2014, 02:40 PM
I think morgano is meaning this:
NefMoto - Index (http://nefariousmotorsports.com/forum/index.php?topi)

With a KKL or Galletto cable. ME7 units can be done with Fg Tech

WBR

darwins
20th July, 2014, 09:19 PM
Which Alientech product covers the above C16C flash boot reading guys ?

I don't see this listed only ST10...


I will continue to remove flash and stop looking for a needle in a haystack :)