renault megane scenic heater

[chris31560]

hi guys, can anyone tell me wots wrong with my heater control on my car, this is wot its doing, there are four settins on the control 1-4 but only number 1 seems to work if i turn it onto 234 nothing happens, so i was wondering is the switch at fault or is it the heater thats faulty..cheers.crhis....

[Meat-Head]

WTF that unusual, how they work sounds like a minimum of two faults. French crap, there was another thread about these you will find usefull

[dell66]

R?sistance Chauffage Renault Scenic I | eBay (http://www.ebay.fr/itm/like/281359806743?lpid=97)

Sc?nic 1 ou 2

[chris31560]

hi m8, its a 2,,,2004.cheers.

[Meat-Head]

Nil poi if his knob has numbers on it

[rideon]

And the fun begins when you realize how much car you have to take apart just to look at the parts you need to replace:top:

[Meat-Head]

If got figers correct, just close eyes and yank, then screw in a dark hole

[chris31560]

come on guys sensible relpy's only..lol dont fancy freezing my nuts off in winter.....

[smokinjoe]

faulty heat resistor or melted plug,possibly both,easiest way to access this is to take out instrument cluster and drivers side of heater box half way down you'll see it held in with 1 t25 or 30 torx.

[rideon]

I may have something to add....


Nil poi if his knob has numbers on it

If that's the case we are writing about....Nil poi melted plug... the wires go straight to blower...

on the other side of the dashboard.....

[chris31560]

thanx for reply's guys,, I wiil see if I can sort it now I have an idea wots goin on cheers...

[juniormaxxx]

If got figers correct, just close eyes and yank, then screw in a dark hole

like gynekologist ?


chris..its easy task once when you have parts in close to youre eyes..first look for resistor pack..there is 3 resistor in network..switch is easy task to remove and measure on his pins,you hae one slider contact and 4 points...one is full speed of blower..im prety sure you resistor pack is burned..but on french sometime only conector on resistorr is melted..first find resistor/regulator

[cmichtobo]

i would go for a resistor

[sjc1]

a new resistor and the modified wiring plug for it, it doubles up the power wire so it dosnt get so hot and melt the pin/connector