View Full Version : MS41.1 CEL code out
ecuconnection
22nd July, 2014, 02:17 AM
Has anybody successfully taken a Auto MS41.1 DME and coded out the feedback for the automatic transmission module? engine is being swapped into a manual. Any help would be appreciated . Thank you!
bobolin4o
22nd July, 2014, 10:28 AM
I think you must use WinKFP, DIS with programming, Progman or ISTA P.
Or clone ECU with software for manual transmission to yours...
stickle2k
22nd July, 2014, 12:10 PM
yes, easiest would be to use DIS v44 - reprogram ECU to software version of non auto.
then use INPA or DIS to realign the EWS.
i know in EU 1429861 MS41.0 software version for a 1997 is 1429954 for manual, and 1429955 for auto. although after remapping, it often brings up the error on ECU the auto control box is not found - no CEL as it is not obd2.
ecuconnection
22nd July, 2014, 03:46 PM
Thanks everyone. This help's :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.