Help Kawasaki ZR800 lost keys

[antvorskov2006]

Hallo
I have a kawasaki ZR800 year 2012 with lost keys. The ecu is denso and eprom is 93c86.
i have zedbul and tango but the no suport 93c86. Then I pay 150 euro to a guy with tmpro to make transponder (4D-62) for the bike.
But the bike still dont start and it is flashes in dashbord (key symbol).

Please is there some one that can help me.

[Bllinda]

What DENSO block numbers? Photo.
Key photo.
tmpro_68_your bike does not_ZX-6R,ZX-10R,ZX-12R,ZX-14R,ZX-1000,Z-750S
photos can send via email...

[Bllinda]

EFfI_version_2.7.0_138 maybe can do.

[gepakg]

this very rare dump for kawasaki,no one tool till now cant do this,i can make it manualy,post page3 of 4d-62 maked with page4 secret key for kawsaki

regards Gepa


Hallo
I have a kawasaki ZR800 year 2012 with lost keys. The ecu is denso and eprom is 93c86.
i have zedbul and tango but the no suport 93c86. Then I pay 150 euro to a guy with tmpro to make transponder (4D-62) for the bike.
But the bike still dont start and it is flashes in dashbord (key symbol).

Please is there some one that can help me.

[antvorskov2006]

Hi and thanks for all your reply.

Yes it looking to be a rare dump for kawasaki, seems that tmpro and other cant make it.

So Gepa if you could help me , it will be nice for you.
The transponder I have is TPX2 , but I have also heard that it most be a original kawasaki transponder to use
and then write into dump file manually as you also write.
I have order a original kawasaki transponder and should be here Tuesday.

Here is key data from TPX2 , if i not can use this transponder, I will have a original kawasaki transponder Tuesday.

[gepakg]

must be original kawasaki key and post it pages from it,but also can be maked from tpx2,get any dump from normal and any kawasaki model and make it via tango,effi,tmpro,and after that post me page 3 also can include it in this strange dump:)

regards Gepa




Hi and thanks for all your reply.

Yes it looking to be a rare dump for kawasaki, seems that tmpro and other cant make it.

So Gepa if you could help me , it will be nice for you.
The transponder I have is TPX2 , but I have also heard that it most be a original kawasaki transponder to use
and then write into dump file manually as you also write.
I have order a original kawasaki transponder and should be here Tuesday.

Here is key data from TPX2 , if i not can use this transponder, I will have a original kawasaki transponder Tuesday.

[antvorskov2006]

Hi Gepa
I have take a normal dump from kawasaki and make key via tango.
Here is keydata from TPX2
page 3 E1 A7 FB 11
page 4 4B 48 49 43 50



Thanks
Antvorskov



must be original kawasaki key and post it pages from it,but also can be maked from tpx2,get any dump from normal and any kawasaki model and make it via tango,effi,tmpro,and after that post me page 3 also can include it in this strange dump:)

regards Gepa

[gepakg]

here is,post results!

regards Gepa


Hi Gepa
I have take a normal dump from kawasaki and make key via tango.
Here is keydata from TPX2
page 3 E1 A7 FB 11
page 4 4B 48 49 43 50



Thanks
Antvorskov

[antvorskov2006]

Hi Thanks
I will try and report.

[marcustee79]

HI GEPA CAN U HELP ME TO CHECK THIS DUMP IS IT THE RIGHT KEY
PG1 FF
PG2 05
PG3 D5D5BF81270855
sorry for late dump

[gwee]

HI GEPA CAN U HELP ME TO CHECK THIS DUMP IS IT THE RIGHT KEY
PG1 FF
PG2 05
PG3 D5D5BF81

where is the dump :questionmark:

[gokey]

upcoming dump

[gepakg]

of course,but for first post dump:-)

regards Gepa


HI GEPA CAN U HELP ME TO CHECK THIS DUMP IS IT THE RIGHT KEY
PG1 FF
PG2 05
PG3 D5D5BF81

[antvorskov2006]

Hi Gepa
If have try and unfortunately it does not start :blue:, flashes in dashbord (key symbol)
I use the key i made with tango TPX2 and your dump file.

Now I have a original kawasaki key
Key data:
pege 3: 4E C4 44 14
pege 4: 4B 48 49 43 50

I hope you still can help me :smile:

[igorr]

tray this but I think that your dump is bad

[gwee]

i think so too :) many 7f :)

[gepakg]

here is,this must work with original keys:-)

regards Gepa


Hi Gepa
If have try and unfortunately it does not start :blue:, flashes in dashbord (key symbol)
I use the key i made with tango TPX2 and your dump file.

Now I have a original kawasaki key
Key data:
pege 3: 4E C4 44 14
pege 4: 4B 48 49 43 50

I hope you still can help me :smile:

[antvorskov2006]

Thanks
I wil try and report .
here is,this must work with original keys:-)

regards Gepa

[antvorskov2006]

Hi Gepa,
I try it and bike start :smile: THANKS
I must say that you are good to what you do.
And again many thanks for help.

here is,this must work with original keys:-)

regards Gepa

[gepakg]

as i told in later post,must work:-)

thanx for response

regards Gepa


Hi Gepa,
I try it and bike start :smile: THANKS
I must say that you are good to what you do.
And again many thanks for help.

[marcustee79]

HI ALL 272174 CAN U HELP ME TO CHECK THIS DUMP IS IT THE RIGHT KEY
PG1 FF
PG2 05
PG3 D5D5BF81

[gwee]

HI ALL 272174 CAN U HELP ME TO CHECK THIS DUMP IS IT THE RIGHT KEY
PG1 FF
PG2 05
PG3 D5D5BF81

key is in the dump

[marcustee79]

hi gwee i just fix back the ecu but still cannot start the bike any help

[gepakg]

then only possible problem maybe that you will not have proper page 4 for kawasaki bikes

if it is correct then search problem on other parts..

regards Gepa


hi gwee i just fix back the ecu but still cannot start the bike any help

[marcustee79]

sorted_again.zip can i have pass please thank (http://www.digital-kaos.co.uk/forums/attachments/f178/270545d1406570643-help-kawasaki-zr800-lost-keys-sorted_again.zip)

[Bllinda]

What determines the content of the page 4?
It is a constant number?
Is it can be calculated? Thanks

then only possible problem maybe that you will not have proper page 4 for kawasaki bikes

if it is correct then search problem on other parts..

regards Gepa

[gepakg]

yes,page4 on kawasaki bikes are stable/constant number,page 2 determines if it is master/slave key...

regards Gepa


What determines the content of the page 4?
It is a constant number?
Is it can be calculated? Thanks

[marcustee79]

how about this can some one help me 280821
and this is the key 280822

[gepakg]

i check your dump and key data,all 4 pages are 100% correct,find problem on other parts for sure,live alone ecu dump & key:)

regards Gepa


how about this can some one help me 280821
and this is the key 280822

[marcustee79]

Ok I will try and thanks