Iveco 35C13 Activation cruise control

[sasy90]

Hi ,
i've a ecu Bosch EDC MS6.3 0281001537 with 29F200, i've MOD original file , and i need activate cruise control. I haven't , unfortunately , a car for test and i need a solution already tested.

Somebody can help me?

Thanks in advance
270270

[sasy90]

Nobody can help me?

[sherl645]

Hi,
No need to activate. Just fit the switch.

[sasy90]

Hi ,
I 've two ecu for this car. With the original ecu ( where the cruise control work ) and i've another ecu ( mod ) where the cruise control don't work. I have to install on this car the ecu MOD and and I want to operate the cruise control.
I can't copy the flash ori in flash mod because they have two different flash ( ori=29F400 ...MOD=29F200 ) .
I say that the cruise control must be activated in ECUs at iveco.
Can you help me?
Thanks

[sherl645]

I have often fitted switches. Upload the two dumps and I'll have a look. I might have a dump to suit you.

[sasy90]

The dumps are here.
"35C13 MODestr.MOD" i need to activate cruise control
"29F200 ORI" is the ori of " "35C13 MODestr.MOD"
"29F400 ORI" is an example of cruise control ON

[przemyslav]

I don't remember exactly but in Iveco MS6,3 half of 29F400 is empty. Just Cut the empty FFFF space and if You cut in the right place then there is no problem to use 29F200.
I'm not sure if it's what You want but i've prepared 29F400 to fit to 29F200
Regards.