mazda 323 1999 lost key

[manasrah]

hello every body

i have mazda 323 lost key and i have immo box and ecu whate can i read eeprom to add key this tyep car used 8c chip

i read ecu eeprom x24c01 and i get pin code but i cant use the tools to programming key like sbb and t300 because the interface not obdii

and the immo box have mcu MC68HC805P18 i cant reda it

so whate can i do to add key ???????

plzzzzz help

[super jumbe]

Mazda and ford was told they same incode and out code system, If I were you I would get the full kit from scrapyard.

[manasrah]

thank u i know the mazda and ford have incode and outcod but not this my problem . the problem how can i add key


so any one have manuel add key or any idea ????????????????????????

[cjawahir]

need two keys , switch ignition on and off 5 times , immo light start flashing fast , wait until start to flash slow .

now input code between flashes switch ignition on count flash as code digit one ,switch off after see amount of flash , wait again and do same thing until all code input .

if code is correct immo light go out and can start car , switch off and start with other key also .

cj

[manasrah]

Thank but whate u means the code ???? The code I get it from ecu dump (24c01)

[super jumbe]

need two keys ,


He lost all keys if you read page #1 if he had 2 keys why he would have bothered to programme keys in the first place??http://www.digital-kaos.co.uk/forums/images/smilies/roflmao.gif

[gwee]

He lost all keys if you read page #1 if he had 2 keys why he would have bothered to programme keys in the first place??:roflmao:

lost key no need to cut key first :questionmark: this is push start :questionmark:......:roflmao:

[autocheck]

Tmpro module 184 can do it without a problem using an unlocked TK5561

Sent from my Android using Tapatalk

[super jumbe]

Tmpro module 184 can do it without a problem using an unlocked TK5561

Sent from my Android using Tapatalk

Bobs your uncle, no more 2 keys then!!!!!

[gwee]

Buy TMpro2, insert the made transponder to the key barrel and Mary's your auntie. No need any key !!! :canabis:

[manasrah]

Buy TMpro2, insert the made transponder to the key barrel and Mary's your auntie. No need any key !!! :canabis:
Thank you . How can I make key with TMpro2 .if I cant read mcu in immo box ??????
PLZ HELP ME

[manasrah]

I have orang5 . Wellon . Upa usb and Xprog m but I havnt adapter for this mcu .... can I read it with any tools I haves

[cjawahir]

in the first post u said u have the pin , i gave u instruction to add key .

cj

[manasrah]

yes I have pin cod I I get it from zed bull because I read eeprom in ecu ....

[cjawahir]

use that pin and follow the instruction i gave u , the instruction i gave u is for the lost all keys .

also post the dump u read from the engine ecu .

cj

[ali re]

hi

read eprom x24c01 from ecu for extract codeword ( pin code 8 digit )and add manualy transponder key ( 8C )

[manasrah]

Thanks to all but I cant see any light flashing for immo in dashboard so where is the immo light