PDA

View Full Version : Megane 2 autoliv 610627600



pepesound
31st July, 2014, 04:59 PM
Hi friend need help,airbag autoliv 610627600 Megane2 2007. The problem is that after the attack, someone before me has cleaned crash. Currently, the car gives 2 errors DF038 ,DF043 left and right latteral sensor.
I bought 2 sensors used by car without any hits, but errors still remain.If anyone has come across this problem i would be grateful to give an idea how to fix this car.I tried but unfortunately does not make configuration.Thanks in advance!

diagprog
31st July, 2014, 09:41 PM
Hi friend need help,airbag autoliv 610627600 Megane2 2007. The problem is that after the attack, someone before me has cleaned crash. Currently, the car gives 2 errors DF038 ,DF043 left and right latteral sensor.
I bought 2 sensors used by car without any hits, but errors still remain.If anyone has come across this problem i would be grateful to give an idea how to fix this car.I tried but unfortunately does not make configuration.Thanks in advance!

Hi, try try this and report...

pepesound
1st August, 2014, 02:32 PM
hi with your dump car gives 5 errors DF091-1DEF,DF067-1DEF,DF066-1DEF,DF177-CO,DF178-CO

pepesound
2nd August, 2014, 06:55 AM
Does anyone have another idea

PierreTheron
2nd August, 2014, 11:05 PM
Hi
try this m8

pass in PM

Regards

pepesound
3rd August, 2014, 11:04 AM
with your file result is : 4 errors
DF038 driver*s lateral sensor - 2DEF
DF043 passenger*s lateral sensor - 2DEF
DF183 driver*s side front buckle pretensioner circuit - 1DEF
DF184 passenger*s side front buckle pretensioner circuit - 1DEF

PierreTheron
3rd August, 2014, 04:09 PM
Hi
Another 2 t0 try m8 .
First one might work correct ..
Second one is from another car that was working correct .

Pass is the same

Regards

pepesound
3rd August, 2014, 08:03 PM
Thanks Pierre,i'll try tomorrow and will tell you the result.:smile:

pepesound
4th August, 2014, 05:04 PM
Pierre thanks for help but dums not work,but i solved problem.

diagprog
4th August, 2014, 05:06 PM
Happy for you my friend, how did you sloved your problem?

pepesound
5th August, 2014, 03:12 PM
I found exactly where the dump is located in the configuration of both the sensor and remove it

iProg-carradio
6th August, 2014, 12:55 PM
I found exactly where the dump is located in the configuration of both the sensor and remove it

test file i send raport.

pepesound
6th August, 2014, 02:20 PM
Thanks my friend but problem is solved!