PDA

View Full Version : Golf 1.8T 2002



luis12
3rd August, 2014, 08:42 PM
Need a full BDM read from a Bosh ME7.5 06A906032HS - 0261207446 made in Germany, date 01/09/04 some tunner corrupted data and ECU dont start tryed to load data from an identical ECU number but from mexico and ECU dont gives inyector pulse.

gezame
3rd August, 2014, 10:41 PM
Hi
Me7.x, do not have mcu MPC5xx, do not have bdm port, do not can read in bdm.
Br.

dean 21
4th August, 2014, 12:23 AM
Hi, here you have your file.

luis12
4th August, 2014, 02:49 AM
Right mate, I say full BDM because a lot of tunners refers full BDM (back up) as a full read, you are correct this ECU is made in Boot mode and has a Infineon C162. I use Ktag for Reading/writing. Thanks for teach... but why if this ECUs has same number the soft dont Works in both, different programming algo?.

OVERSPEED
4th August, 2014, 05:54 PM
Maybe injectors drivers are burned...

luis12
4th August, 2014, 09:09 PM
Thanks mates, use DEAN 21 flash file and ECU backs to life, car runs OK.... friend overspeed this ECUs kills inyection if cheksum are incorrect, tunners must be carefull with it when Works.

OVERSPEED
6th August, 2014, 07:08 PM
I made a lot of these, but never get in this situation... anytime CKS where incorrect I could not even comunicate with ECU (just have to reflash another file in boot)

luis12
7th August, 2014, 01:28 AM
I think that data was corrupted by some tunner the interestig thing was that all parameters was normal but only inyector pulse width was 00mv, perhaps he tried to enrich and some mod was not good, first time I see this failure too but alldays we are learning.