View Full Version : PEUGEOT 307 IAW 6LP1.50 + PIASINI
prusony
5th August, 2014, 05:48 PM
HI, Help to read ST10F280-B3, from ECU IAW 6LP1.50 via Piasini.
I tried connecting by instructions from HELP piasini - does not work, try lot variants - nothing works.
How connect power to ECU ??
How connect boot mode rezistor or bridge or..... ??
Help PLZ. TNX
betrescudan
5th August, 2014, 06:15 PM
maybe help you
prusony
5th August, 2014, 07:35 PM
These pictures i have, Galetto-2 does not work with this ECU.... TNX
johnybilly
6th August, 2014, 02:17 AM
i have a piasini also and tried to read a lot of ecu?s from honda bikes and suzuki, followed all the instructions but i could not read any of them... :( there is almost no info avaiable for this tool on the web...
Zmann
6th August, 2014, 02:41 AM
HI, Help to read ST10F280-B3, from ECU IAW 6LP1.50 via Piasini.
I tried connecting by instructions from HELP piasini - does not work, try lot variants - nothing works.
How connect power to ECU ??
How connect boot mode rezistor or bridge or..... ??
Help PLZ. TNX
Piasini there are 4 different PDF's for 6LP, have you checked them all? must be the one that matchs your PCB.
morfej
6th August, 2014, 06:20 AM
The easiest for you to make a decent picture of you pcb and put it here.
prusony
6th August, 2014, 07:07 AM
The easiest for you to make a decent picture of you pcb and put it here.
My ECU is absolutely identical to that PDF ...
(I did jumpers, resistors, etc.......)
prusony
6th August, 2014, 12:03 PM
Good news - i read ECU with Galetto-2. ( TOOLS BOOT MODE / ST10F280 )
Now asking help - remove EGR .
PLZ Help.
Thanks in advance for any answer.
prusony
8th August, 2014, 08:55 AM
DPF impossible to remove apparently.....
Is it possible remove error P0400 ???
kennfeld
9th August, 2014, 11:18 AM
use 4.3 version it will work
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.