peugeot 307 1.6hdi i need DPF off

[varus]

hi guys,
anyone disable the DPF 307 1.6hdi,
read mpps,
will help someone?

[gad3n]

here you go mate! there is high chance you will kill ecu with mpps but it's your choice to try :)
271832

[betrescudan]

here you go mate! there is high chance you will kill ecu with mpps but it's your choice to try :)
271832
why killing ecu if use mpps?that clone work fine on bosch ecu...no problems yet...if read is ok,writing no problems...verrify voltage batterie and no screen saver or power options activated on laptop...good luck

[gad3n]

try it on focus c-max same engine and you will see .... dimsport genius killed it the same way as mpps by the way :)

[betrescudan]

I USED DIMSPORT MASTER ON S-MAX WITHOUT PROBLEMS...maybe to you was sommes errors from batterie?...or clone?
what year was your car maded?

[gad3n]

dimsport new genius master original :) ... and no problem with battery :)

[betrescudan]

dimsport new genius master original :) ... and no problem with battery :)
what year was your car maded?

[gad3n]

2008 if i remember correctly

[betrescudan]

starting 2009 years can be problems

[elmassioui]

MPPS just read 45 % from file,can not done right the job.

[gad3n]

only BDM reads the complete file ... but writing is the problem :)

[mishu_b]

try it on focus c-max same engine and you will see .... dimsport genius killed it the same way as mpps by the way :)

totally agree with you!
this engine will lose on writing process the codes of the injectors.

I know a lot of cases, it is not about the tool used for writing it is about the protocol implemented on this PSA engine.
the safe way is BDM port.

[betrescudan]

totally agree with you!
this engine will lose on writing process the codes of the injectors.

I know a lot of cases, it is not about the tool used for writing it is about the protocol implemented on this PSA engine.
the safe way is BDM port.
yes...but if you touch the PSA engines,must to have and the Diagbox PSA...so first of all opperation,you can print the codes of injectors,than recode with diagbox,or the clone of Delphi autocom...

[gad3n]

error after repairing file is Variant selection ... otherwise engine runs fine :)

[varus]

Thank you for your help GAD3N works! after programming MPPS, cut the ignition for about 5 minutes and all ok

[gad3n]

enjoy your car :) i know solution is OK tested many times :)

[dimet]

here you go mate! there is high chance you will kill ecu with mpps but it's your choice to try :)
271832

Please password for file. I have the same problem with dpf of 307 peugeot 1.6 hdi.