help with bosch me9 need reading

[large12390]

hello all dk
when i try to read that ecu in attach with dont sacces
please eny info how can i do that
i trayed with fgtech +bdm 100
regards

[gttuning]

you would get help if maybe put some more info.
what car,year ,ecu number.......

[large12390]

you would get help if maybe put some more info.
what car,year ,ecu number.......
thanks for replay
this car is chevrulte captive v6 year 2008
ecu 261 209 107
notce this ecu like alote of gm ecu
regards

[large12390]

hello all dk member
no one can help me please?
regards

[ominimicu]

Here check out my video
https://www.youtube.com/watch?v=JohHgppU-4A

[mishu_b]

you will find into the attached file the position of the BDM port and pin No.1
If you will use and "BDM_frame" and "Bosch adapter 10 pins" (2 x 5 pins) than no issues with it.
272438

For FGTech you have to use the convertor modul from "FGTech to CMD" as intermediate connector.

[large12390]

Here check out my video
https://www.youtube.com/watch?v=JohHgppU-4A
hi dear
thanks for u.r help
but i think its dont like my ecu u have port with 10 pins and my is 14 pins and defrint ecu
eny anther sulation please
regards

[large12390]

you will find into the attached file the position of the BDM port and pin No.1If you will use and "BDM_frame" and "Bosch adapter 10 pins" (2 x 5 pins) than no issues with it.272438For FGTech you have to use the convertor modul from "FGTech to CMD" as intermediate connector.thanks dear for u.r helpbut alsow how about this in attahc photo i alrdy try with?regards

[ominimicu]

ECu has both pinouts 10 on one side and 14 on the other side. use which one u like!

[large12390]

ECu has both pinouts 10 on one side and 14 on the other side. use which one u like!
thank u v mutch for slear replay
but small help please
can u show my the pin no 1 in anther said with 10 port
regards

[large12390]

hi all dk members
i am still if therr eny sulation of this ecu please
regards

[ttzag]

Why u not post here photos for your ecu ?

sent from LG_G2

[large12390]

hi dear mr ttzag
thank u very mutch to u.r help
u can see photo in frist post u can see ther in rer file
regards

[ominimicu]

bdm pdf manual or fgtech shows u how to find pin1 using a multimeter and searchig for 2 gorund points

[large12390]

Hi
yeas dear i see pin 1but when i try conect in bsck said like u tell me without sacces and in fridt said relly i cant becude i have only adptor of 10pin not 14 i know 3-4-13-14 dont use but the ask how conect 10adptor to poard pleade if u need help me do for me photo pin no 1on ecu wher vonect to bosch in adptor that without 3-4
Sorry like u know my english not to good meaby this my mean problem
king regards

[large12390]

HI DEAR MR ominimicu
PLEASE SEE THIS PHOTO is this pine out is ok or no when need read by bdm100
and alsow is this ecu need aditional power or no??
keng regards

[ominimicu]

use the siemens adapter!!

[carmageddon]

if ecu are bosch you can not use siemens adapter, i dont undrestand what is the problem, this is ME9, all bosch ecu have 14 pad but need only 10 from pin 1!

[ominimicu]

ahh u opened the other side!!!...good that is bosch just like any bosch!!
yes needs 12v in the middle adapter!
check out video
https://www.youtube.com/watch?v=5KPvVKLoD04

[large12390]

ahh u opened the other side!!!...good that is bosch just like any bosch!!
yes needs 12v in the middle adapter!
check out video
https://www.youtube.com/watch?v=5KPvVKLoD04
hi dear mr ominimicu
hope be btient with me i am in newbe on bdm
and i see u have adptore than in stand i dont have its but i have that in anther said about that i think i cand do gob with only if ther way to do with that adptore alone
or if ther is way with adptor and tool to bdm100
king egards

[large12390]

if ecu are bosch you can not use siemens adapter, i dont undrestand what is the problem, this is ME9, all bosch ecu have 14 pad but need only 10 from pin 1!
hi dear mr carmageddon
thanks for u.r help the problem i am newst with this gob about that i dont understan meany think
as u say u mean can i use 10 pins from 1 to 10 and from 11 to 14 all dont use? not like my photo?
and is this with bdm100 or fgtech
king regards

[carmageddon]

you speak about clone or genuine tool?

[large12390]

Hi dear
its clone tool
regards

[ttzag]

i think this will help you ,
am always use it with bosch with MPC with clone fgtech

[carmageddon]

Hi dear
its clone tool
regards

any clone tools you use have always the same connectione on this bosch, always from 1 to 10 on sequence, the last 4 are free from connection

[large12390]

hi dear mr ttzag
i did like u.r photo but without sacces see resulte in attach dear
king regards

[large12390]

any clone tools you use have always the same connectione on this bosch, always from 1 to 10 on sequence, the last 4 are free from connection
hi dear mr carmageddon
is this rul work and need anther power supplay or dierct by pin?
regards

[ttzag]

From this photo use :
DSDI
DSDO
DSCK
PORST
And use 12V(IGN) and 12V and GND from external power


sent from LG_G2

[carmageddon]

View image: 10934007 10205384556990661 7831970439668369136 n (http://postimg.org/image/cta6nvy0v/)

View image: 10520689 10205384557630677 2035861976974274828 n (http://postimg.org/image/cj2o4jjen/)

View image: 10645249 10205384556230642 8941893808849183343 n (http://postimg.org/image/6r2jxe9kv/)

View image: 10624749 10205384558230692 1710686368521437799 n (http://postimg.org/image/nsc6j1f4x/)

View image: 10350425 10205384554990611 3340562181330473483 n (http://postimg.org/image/vnmpxuorl/)

this is not ME9 but is one bosch EDC16C3, same pad for connect to bdm, this is an example for what you need to do

[large12390]

dear mr ttzag
And use 12V(IGN) and 12V and GND from external power
please can u tell me the pin number of that?
regards

[ttzag]

No i can't .....lol
Hey man It's in the photo
12V
12V(IGN)
GND

[large12390]

:rofl:dear mr carmageddon
i did like u.r photos 100% but i get sem resault

[large12390]

dear mr ttzag
i know i am stupedwith bdm
will do but ask please is this conect direct to fgtech tool without used eny adaptor?
king regards

[ttzag]

U can use adapter and u can solder wires

sent from LG_G2

[large12390]

U can use adapter and u can solder wires

sent from LG_G2
hi dear mr ttzag
i solder like u do and sem result
:rofl:
regards

[large12390]

hi dear all members
i post her anther meany anther photo to this ecu meby will help to get anther info
number of ecu
cpu number
anther side of ecu
regards

[ttzag]

Do you see this ecu is me9?
And what car?
Try my method with another ecu to sure is your fgtech is working good.

sent from LG_G2

[large12390]

Hi dear ttazg
like u know i dont have exberiens with ecu i dont know witch ecu this i send all info to members know witch ecu and how read its
about u.r mathod i did all from u and from anther all sem resullast think this ecu for gm grope like caddillac and suzuki xl7 and alot of gm cars after 2007
King regards

[ominimicu]

Send me ecu i ll do it for U!!!

[large12390]

Hi dear
thsnks but i think srbd to drfeculr far awy from me to uregards