PDA

View Full Version : Need BDM readout SCANIA R500 2008 E5 EMS6. 1726098 PDG02091Q



spychu14
13th August, 2014, 12:02 AM
I need BDM readout or BDM + OBD2 to compare EMS6 Scania R500 2008 E5

HW : 1726098 SW : 1549, 1549734
ECU ID :
EMS S6 DC1606 L01
XLER4X20005190800
1726098
Scania
070930
PDG02091Q
1874470
110528
1549734
1874502
1874461
1874534
Even any other EMS6 BDM readout would be helpful. After OBD flash, mpc is erased.
272729

sisco1
22nd August, 2014, 09:45 PM
ciao ho questo vedere se aiuta

70max
22nd August, 2014, 10:11 PM
ciao ho questo vedere se aiuta

Hi friend
you should write in English
use google translator is not the best
but it works.


ciao amico
ti conviene scrivere in Inglese
usa google traduttore non ? il massimo
ma funziona.


Saluti max

sisco1
24th August, 2014, 08:25 AM
Hi friend
you should write in English
use google translator is not the best
but it works.


ciao amico
ti conviene scrivere in Inglese
usa google traduttore non ? il massimo
ma funziona.


Saluti max

hello friend I used google translator

sisco1
24th August, 2014, 08:26 AM
I need BDM readout or BDM + OBD2 to compare EMS6 Scania R500 2008 E5

HW : 1726098 SW : 1549, 1549734
ECU ID :
EMS S6 DC1606 L01
XLER4X20005190800
1726098
Scania
070930
PDG02091Q
1874470
110528
1549734
1874502
1874461
1874534
Even any other EMS6 BDM readout would be helpful. After OBD flash, mpc is erased.
272729
hello which tool you used to write from obd?

spychu14
24th August, 2014, 12:31 PM
Everything is ok now. Very easy to repair by obd ;)

sisco1
24th August, 2014, 04:27 PM
how did you do? you've written the file again before bed and everything went okay?

spychu14
25th August, 2014, 01:04 AM
Just write ori file without ECU ID.

Babos
25th August, 2014, 05:46 AM
How you read full via BDM?
I try read EMS 6 Motorrola from scania but can read good only eeprom flash read only FFFFFF.
It is look is emty or tool use wrong driver for read that flash!
I try read and use Fgtech V48 and 54 result is same.
Maybe some one have expireance with that ecus from scania?

spychu14
25th August, 2014, 04:32 PM
Some say that only ori cmd can read by bdm this ecu.

sisco1
26th August, 2014, 12:04 AM
Some say that only ori cmd can read by bdm this ecu.

I have only read about but never written I used FGTech 48 controls the file that I posted above is good?

Babos
26th August, 2014, 07:40 AM
I have only read about but never written I used FGTech 48 controls the file that I posted above is good?

I dont know i not see before that files but inside is info in my MPC i have only FFFFFF