View Full Version : Instrument cluster from Smart roadster faults.
electrones
13th August, 2014, 11:18 PM
Hi friends
This car Been stopped for 2 years now, have faults on instrument cluster "CAN LINE", not the mileage, fuel gauge on dash, some lights do not work, only work AIRBAG light and Maxim.
I have check for fuse all is ok, wires all is apparently okk,
I can?t communicate with instrument cluster.
If someone help mw with wire diagram for this instrument cluster, i?ll appreciate"Smart Roadster 2003"
DTC from SAM module:
B1015
B1016
B1017
B1021
Thanks in advance.
electrones
14th August, 2014, 01:39 PM
Any suggestions
Can someone take a look at this file and tell me if it's ok or not, please!
cheers
audiomeca
14th August, 2014, 05:16 PM
Hello, identical problem today with one roadster, i disconect battery and when reconnect ,dash not boot
your file is wrong
try my file
electrones
15th August, 2014, 04:56 AM
Hello, identical problem today with one roadster, i disconect battery and when reconnect ,dash not boot
your file is wrong
try my file
Thank you m8
Your file doesn't worked
Any help please!!!
audiomeca
15th August, 2014, 05:27 PM
hello try this, I test today
electrones
16th August, 2014, 03:42 AM
hello try this, I test today
Thank you m8
Again your file doesn't work, may be because mine is Roadster"93c86 and yours fortwo"93c66" "instrument cluster"
Any suggestions for this case will be appreciated
Thank in advance
audiomeca
18th August, 2014, 12:24 PM
My file is from roadster not fortwo, and is 100% tested in one roadster dashboard, if you edit in hex my file can see that is from roadster not fortwo ,and the size is from 93c86 not 93c66
if my file not run , you need a new dashboard, not have a problem from the dump, is a mcu problem
buy one new or used and adapt to the car
electrones
2nd October, 2014, 05:51 AM
Thank you m8 today i have received new dash
Job Done ;)
Cheers
Audi SP
29th October, 2014, 10:13 PM
Hello .. you could change the frame easily with the instrument panel used?
Audi SP
29th October, 2014, 10:15 PM
I'm replacing the frame on the framework used .. but I see forever - - - - - - - - - -
electrones
30th October, 2014, 08:06 PM
Hi friend
I think yes,
You need dump from old dash to write to used
Cheers
kennfeld
23rd May, 2018, 11:06 PM
Any suggestions
Can someone take a look at this file and tell me if it's ok or not, please!
cheers
that file is very badly encoded
530586
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.