Passat 2002 AZM 06B906033AA change AT to manual

[Serg1o]

VW Passat 2002 2.0i 8v AZM Benzin Simos3.2A 4002 06B 906 033 AA 5WP40109 04 ER SME 210120 R031 0124. Coding 00073. Changed the automatic transmission to manual. In vehicle changed the coding all blocks, except for ECU. In the ECU can not change the coding. Set coding 00073, and therefore it is necessary to 00071. Faults due to the TCM.

272909

[veloseeped]

Not possible recoding this ECU to work with manual transmission.
Change flash dump in 29F400 with FULL dump from 06B906033T and than recode ecu to 00071.

[Serg1o]

Not possible recoding this ECU to work with manual transmission.
Change flash dump in 29F400 with FULL dump from 06B906033T and than recode ecu to 00071.

I write flash from 06B906033AL. Recoding OK. Only Eeprom error.

[morfej]

find eeprom dump from AL as well and make immo off if you need to.

[veloseeped]

I write flash from 06B906033AL. Recoding OK. Only Eeprom error.

It's because 033AL is for 2003+ model year.
Case of change 033AA (2001-2002 MY) must load 033T not 033AL file.

[veloseeped]

Original 03B906033T dump

[Serg1o]

Original 03B906033T dump

Very thanks veloseeped.
This is the right Solution. Everything is working fine!...:top::top::top:

[negative2323]

Have the same issue, but ECU 06B906033AE (AT). Tryed to upload fullflash from this post 06B906033T , but car doesnt start, no dtc issue coding is emty car not start.. Which dump do I need to upload 06B906033AL? By the way if i modify ori dump even one byte and flash it back car doesnt start, and has dtc P0606.
May be some one can help..
Thanks..

[gola77]

Hello.
Please flash and eeprom fo driver 06B906033AL

[kiszka]

Hello.
Please flash and eeprom fo driver 06B906033AL
Instead of 06B906033AL you can also use 06B906033AP