PLEASE READ PIN FROM ECU'S EEPROM DUMP CITROEN XARA 1.6 PETROL ECU BOSCH 0261206606

[siwyauto]

PLEASE READ PIN FROM ECU'S DUMP 95160 CITROEN XARA 1.6 PETROL ECU BOSCH 0261206606

I HAVE BURNED ECU AND ANOTHER NEWONE, WHEN I SWAPED EEPROM 95160 AND FLASH 29F400 THE CAR DIDN'T START SO I THINK THAT CONTENT OF EEPROM AND FLASH IS BROKEN SO I WANT TO INITIALIZE NEW ECU WITH LEXIA BUT I DON'T KNOW PIN CODE...

THANKS


273498

[Zmann]

Immo Xasa ORG > V6GT
Immo Xasa 1 > J7BV

[Onwuka williams]

V6GT ORIGINAL
J7BV IMMO XZARABIN1

[alclot]

Hi Friend. I have the same problem as you. I've already got the pin of the new ECU software, but do not know how to initialize the ecu with the lexia. Could you tell me the instructions to do?
Thanks in advance ;)

[alclot]

Help me please ;(

[alclot]

Hello. Forgive it a little annoying but I never did. With ECU of Opel's easy to do this but I never did in PSA. I will be very grateful for your help.
Thanks in advance ;)

[autodigitec]

I program a lot of new bsi's with lexia, but don't quite remember last time I learned an ECU.

It should be very similar. Just enter the motor ecu and should have a "Learning" menu. Then don't remember the options, but they are common sense I think.

[alclot]

Hi friend. I need step by step if possible. Never make here matching :(

[GolfmkI]

It is very easy simply enter Engine Ecu and in the bottom you have telecode and sync option.

Very easy

If not able go to BSI and in the botton clic in

PROGRAMMING

YOU HAVE THREE OPTIONS

Initialize BSI ( it requires whole process BSI+KEYS+ECU)

Programm keys ( only this ;))

Initialize Ecu (Engine Ecu)

If keys are recognized ok...simply clic on initilize Ecu.



Also in the beginning of Lexia you have the option:

INSTRALL NEW COMPONENTS ( Its a guide Step by Step)

Believe me it is easy, simply read information and conditions.

Remember very good battery condition

[alclot]

Thanks for info Golfmkl and autodigitec (http://www.digital-kaos.co.uk/forums/member.php/264433-autodigitec);)