Hypercam N2 Fix How To

[despdan]

Here is a guide to help get Hypercam N2 Ireland fix working on Dreambox & Automatically Starting

1: Delete all files in the keys & scce folders you won't need them & uninstall any cams you have loaded.

2: On your Image go to the download software add on menu on your box:
If you can't find that then you are very sad person:) (Pli-Jade don't look for it as it's not listed see bottom for howto)

3: Download whatever version is available at this stage it doesn't matter.
I have found that 1.01 will work:) If you want to use hypercam1.06 go to the var/bin folder & delete the hypercam file in there not hypercam.cfg now ftp the 1.06 file into that folder.(Remember to chmod the file if you do)

4: Now ftp the hypercam.key file into the var/bin folder.

5: When you have that done go to cam setup & set it as default cam.

6: Now put the box on RTE1 or what ever channel is normally clear.

7: Reboot box after 1min change channel & BINGO:) you might have to wait a couple of mins then change channel again:(


PLI-JADE

To add a Soft Cam manually:
FTP the appropriate files to your box and chmod 755 the files

Create an empty file with the same name as the Soft Cam, for example "hypercam".

Upload this file to /var/etc/plimgr/cams/

PLi Manager will now detect the new SoftCam "hypercam".

Choose the new Soft Cam in the SoftCam Setup

Then do steps 6 & 7

[delboy13]

i am using hypercam in england. and i thought you had to link the roms from var/scce to var/keys/nagra to make hypercam work. so can i delete the link or is just for n2 fix that you don't need the roms. thanks

[satman]

you only need the roms if your n1 ,,, and a proper uk hypercam.keys,
n2 you only can run on keys for now.

[donaljoconnor]

Thanks Despan. Worked a treat on my dreambox 600.

Do you happen to know of a version available for the 7025? Or an image that has it available to download from the menu?

Thanks in advance.

[freck]

Here is a guide to help get Hypercam N2 Ireland fix working on Dreambox & Automatically Starting

1: Delete all files in the keys & scce folders you won't need them & uninstall any cams you have loaded.

2: On your Image go to the download software add on menu on your box:
If you can't find that then you are very sad person:) (Pli-Jade don't look for it as it's not listed see bottom for howto)

3: Download whatever version is available at this stage it doesn't matter.
I have found that 1.01 will work:) If you want to use hypercam1.06 go to the var/bin folder & delete the hypercam file in there not hypercam.cfg now ftp the 1.06 file into that folder.

4: Now ftp the hypercam.key file into the var/bin folder.

5: When you have that done go to cam setup & set it as default cam.

6: Now put the box on RTE1 or what ever channel is normally clear.

7: Reboot box after 1min change channel & BINGO:) you might have to wait a couple of mins then change channel again:(


PLI-JADE

To add a Soft Cam manually:
FTP the appropriate files to your box and chmod 755 the files

Create an empty file with the same name as the Soft Cam, for example "hypercam".

Upload this file to /var/etc/plimgr/cams/

PLi Manager will now detect the new SoftCam "hypercam".

Choose the new Soft Cam in the SoftCam Setup

Then do steps 6 & 7
Good guide Despan,badly needed and should be a sticky for other members trawling around and getting bits and pieces on different threads.:congrats:

[despdan]

Thanks Despan. Worked a treat on my dreambox 600.

Do you happen to know of a version available for the 7025? Or an image that has it available to download from the menu?

Thanks in advance.I don't think so, you will have to wait till they release hypercam for Enigma2 images but they might not:( . You could get them off the 600 you have working:) maybe

[alanbk]

I don't think so, you will have to wait till they release hypercam for Enigma2 images but they might not:( . You could get them off the 600 you have working:) maybeTried that and it will not work !!!!Boo Hoo

[donaljoconnor]

Yeah, the enigma1 version of Hypercam won't execute on enigma2 :(

[wozzo]

Yeah, the enigma1 version of Hypercam won't execute on enigma2 :(

Can your run MGcamd on enigma2?

If so use the dbox2 fix.

[poolfan]

Can your run MGcamd on enigma2?

If so use the dbox2 fix.

dbox2 fix for ireland didnt know there was one released.

cheers thats great new

[clancyoo7]

I followed the instructions to the letter but the channels are not coming in. I initialy put hypercam 1.06 and keys into the folder var/bin and went to emu manager and selected version 1.01 eventhough i had the latest 1.06. channels never cleared When that failed I just went back to the version 1.01 and loading keys on again. but I am having no joy. do i have to change attributes to any of the files.

Please help.
clancyoo7

[despdan]

I followed the instructions to the letter but the channels are not coming in. I initialy put hypercam 1.06 and keys into the folder var/bin and went to emu manager and selected version 1.01 eventhough i had the latest 1.06. channels never cleared When that failed I just went back to the version 1.01 and loading keys on again. but I am having no joy. do i have to change attributes to any of the files.

Please help.
clancyoo7Did you chmod the hypercam file to 755?

[clancyoo7]

thanks for quick reply changed the attributes to 755, and saw in another thread that you could execute in tuxbox commander, worked a treat. Back in business, thanks again Desperate dan,

[phester]

I found that Hypercam in PLI did not autostart when the following was done.

exe hypercam_1.06
blank file for pli hypercam_1.06

Image said it was running (top of screen) but linux top did not show it running

Fix for me was to rename exe to just hypercam and blank file to same. Then reselect from Cam menu. Now it starts with the box

Does linux not like"_" or did I miss something.

[donaljoconnor]

Can your run MGcamd on enigma2?

If so use the dbox2 fix.

I'll try that this evening.

Thanks wozzo!

[despdan]

I found that Hypercam in PLI did not autostart when the following was done.

exe hypercam_1.06
blank file for pli hypercam_1.06

Image said it was running (top of screen) but linux top did not show it running

Fix for me was to rename exe to just hypercam and blank file to same. Then reselect from Cam menu. Now it starts with the box

Does linux not like"_" or did I miss something.Like I said in my post
Create an empty file with the same name as the Soft Cam, for example "hypercam". I think if you write "1.06" in the file it would work but it's just easy naming it "hypercam":)

[Migz]

does hypercam work in neutrino images?

[despdan]

does hypercam work in neutrino images?Yes but you might have to start the cam manual.

[mcgeoff]

How do you chmod to 755 have been try for a while and cannot get it to work

[despdan]

How do you chmod to 755 have been try for a while and cannot get it to work
if you have tuxbox commander goto var/bin highlight the file press 1 change the boxes to green save & exit.

[mcgeoff]

Many thanks Despdan will try that and let you know how I get on
mcgeoff

[mcgeoff]

Can anyone tell me how to set hypercam to default emu.

[despdan]

Can anyone tell me how to set hypercam to default emu.Depends on what Image your using?

[mcgeoff]

Many thanks to people on this site have got box up and running again.

mcgeoff. :congrats:

[quark01]

does this fix work for anyone with Chorus in ireland.

I am using Digital Kaos v1.1 image I uploaded the 3 files for the irish fix to /var/bin hypercam.cfg, hypercam.keys and kypercan_1.06. I chmod the files to 755. If I try to start ./hypercam_1.06 I ger error "bus error" not sure why this happens ???

I also tried holding down info button on the remote of the 500c until I get EMU manager, in there I selected Evoca enulation is running

I then scan for Choris channels it finds 100+. I go to RTE I can view it but no other encrypted channels. I also rebooted

[EAMO 2]

does this fix work for anyone with Chorus in ireland.

I am using Digital Kaos v1.1 image I uploaded the 3 files for the irish fix to /var/bin hypercam.cfg, hypercam.keys and kypercan_1.06. I chmod the files to 755. If I try to start ./hypercam_1.06 I ger error "bus error" not sure why this happens ???

I also tried holding down info button on the remote of the 500c until I get EMU manager, in there I selected Evoca enulation is running

I then scan for Choris channels it finds 100+. I go to RTE I can view it but no other encrypted channels. I also rebooted

NTL are using NAGRA 2 ;this needs N2 IRL fix
CHORUS are still on NAGRA 1 [cable& terrestrial]
If your on CHORUS cable the nov/dec 08 fix will do
On dk 1.1 use blue button to turn on Mgcam
I don't know what fix is needed for terrestrial but some
member in your area could advise you

[red devil]

does this fix work for anyone with Chorus in ireland.

I am using Digital Kaos v1.1 image I uploaded the 3 files for the irish fix to /var/bin hypercam.cfg, hypercam.keys and kypercan_1.06. I chmod the files to 755. If I try to start ./hypercam_1.06 I ger error "bus error" not sure why this happens ???

I also tried holding down info button on the remote of the 500c until I get EMU manager, in there I selected Evoca enulation is running

I then scan for Choris channels it finds 100+. I go to RTE I can view it but no other encrypted channels. I also rebooted

wat box do u have
are u on cable or terrestrial
and have u ftp'd the fix
give a brief rundown on wat u have done so far
and u will be sorted soon

[ozshea]

ive done everytin that despsan said in his first post but i still have to restart cam manually after powering the box down, i have a 500C and using DK1.1,

i cannot find the cam setup option to set hypercam as the default cam......:stupid:

[red devil]

ive done everytin that despsan said in his first post but i still have to restart cam manually after powering the box down, i have a 500C and using DK1.1,

i cannot find the cam setup option to set hypercam as the default cam......:stupid:

try the pli image, it works for me

[tomhick024]

I installed the hypercam fix on my 500t Chxxus mmds (Dk1.1 image)because MGM Movies was not clearing and it worked perfectly , but does anyone know how to make this my default cam as i have to start it manually through Tuxbox Commander anytime I power down?
Cheers
T

[Ciaran500]

Can't get this to work on my clean install of a PLI image.

Created a text file, called it "hypercam", removed the .txt from the name and uploaded it to /var/etc/plimgr/cams and chmod it. Then I have to upload the 3 files in the .tar "hypercam", "hypercam.cfg" and "hypercam.keys". Not sure where to put them so I tried /var/bin and /tmp and chmod them but no cams are appearing in the softcam setup.

[despdan]

Create a folder called hypercam & put it in the /var/etc/plimgr/cams folder, it will then appear in the softcam menu.

[Ciaran500]

http://img263.imageshack.us/img263/4479/captureztp.jpg

That didn't work for me. Only default shows for the list of Soft cams available.

[red devil]

did u reboot and check it then ?

[Ciaran500]

did u reboot and check it then ?

Yep :/

Rebooted and tried unplugging it.

[despdan]

download any cam via the menu then rename it hypercam.

[Ciaran500]

download any cam via the menu then rename it hypercam.

Downloaded Evocamd and it installed successfully but its not showing in my softcam setup. Same with CCam that was already installed with the image. :hmmmm2:

[despdan]

I would flash the box again with pli image & start again, might be a bad flash.

[paulybhoy]

Hi Despdan,

I'm new to this so bear with me. I have followed all that you said in your post but can't get the Hypercam 1.06 to start up as the default. When I press the blue button on the remote it shows the EMU Manager and Evocamd 2.12 is the only one available.
How do I set the Hypercam as the default?
How do I access the cam setup? is it with the remote control (what folder)or when the box is connected to my PC?

Please help as I am a novice at this and it is driving me crazy..............

[wilbirger]

Hello,
I am new to this but have got my DreamBox 500t on Cho**s MMds.
I cant download anything from any damm sites which is annoying.
Anyway I have scanned and found my channals but they are scrambled.
Anyone know what surely works to clear N2?
Was everyone using Hypercam 1.06?

[Ansem]

Hello,
I am new to this but have got my DreamBox 500t on Cho**s MMds.
I cant download anything from any damm sites which is annoying.
Anyway I have scanned and found my channals but they are scrambled.
Anyone know what surely works to clear N2?
Was everyone using Hypercam 1.06?

N2 is gone bud, it was only there for a short while
It's now and has been for a long time nagra 3
I think I replied to another post of yours already
Only way that box will work is with cardsharing