PDA

View Full Version : EDC 16C39 on opel read/write with fgtech galetto v53 via obd



crackerx
29th August, 2014, 09:51 AM
EDC 16C39 on opel read/write with fgtech galetto v53 via OBD

does anyone do this?
working ok in read/write?

many thanks

gttuning
29th August, 2014, 09:54 AM
better use mpps if you have

crackerx
29th August, 2014, 10:03 AM
i don`t have mpps and:

-someone say if i use mpps probably i will lost the injectors codes after remap
-the fgtech is absolute ok on read/write this ecu and the water must be below 50'C

gttuning
29th August, 2014, 10:54 AM
Opel edc 16c39 i had job this week.always use mpps on edc16c39 and c9

Sent from my GT-I9505 using Tapatalk

bajad
29th August, 2014, 11:09 AM
galleto sometimes work sometime not on this ECU , MPPS - always works :)

Bllinda
29th August, 2014, 01:30 PM
What version of the MPPS?

gttuning
29th August, 2014, 01:31 PM
i don`t have mpps and:

-someone say if i use mpps probably i will lost the injectors codes after remap
-the fgtech is absolute ok on read/write this ecu and the water must be below 50'C
r u talking about opel?

bajad
30th August, 2014, 07:52 PM
What version of the MPPS?
I use v16 now

tunertool
30th August, 2014, 11:06 PM
Yes MPPS is better IMO for this. Sometimes reading doesn't work as it fails to read key.

Thanks

pablo1971
31st August, 2014, 12:56 AM
tbh i would rather do a bdm read/write....these ecus fail on obd write with many tools.

bajad
31st August, 2014, 04:57 PM
of course BDM is better , but i have not any MPPS fails yet with opel ecus .

Bllinda
31st August, 2014, 05:19 PM
Thanks. Original or china?


I use v16 now

bajad
31st August, 2014, 06:52 PM
it is china

gttuning
3rd September, 2014, 08:24 AM
even when it will brake ecu ,its not hard to fix.there is a lot of full bdms for them.

overs0ull
3rd September, 2014, 10:35 AM
i ahve FGtech galleto 2 and i read/write edc16c39/c9 on astra H and zafira B few times and never faild me by OBD ,mpps is good tool but somethime didn't id the icu or stop on the end of flashing version 12 i have and both euro clones.
Regards

tadeo
3rd September, 2014, 10:55 AM
i ahve FGtech galleto 2 and i read/write edc16c39/c9 on astra H and zafira B few times and never faild me by OBD ,mpps is good tool but somethime didn't id the icu or stop on the end of flashing version 12 i have and both euro clones.
Regards

Did you read edc16c9 ?


Sent from my iPhone using Tapatalk

overs0ull
5th September, 2014, 10:16 AM
yes i read it and write it on opel Zafira B to make EGR off and all fine read/write fine .
But sume info - i change few elements on my galleto 2 cause before that ,it not work over edc16 it have one big thread here galleto 2 fixing and after that all work fine , bdm , flash edc16/edc15 tricore - all .