PDA

View Full Version : Request ori PSG16 Vectra C 2.0tdi 101hp



djbiugi
29th August, 2014, 03:45 PM
Hi...please request this ori file...this is the ID do with Official Galletto

W0L0ZCF6921045162
Y20DTH
DJAMS010_S
..........
BOSCH0100
B020081


thanks

Babos
29th August, 2014, 05:32 PM
Best way be found customer with Tech2 and update ecu software.

djbiugi
29th August, 2014, 05:42 PM
yes...but i must find a dealer that can do a pleasure to me :-(

cool2503
29th August, 2014, 05:47 PM
Only tech2 or passthrough device can do this on psg16

gezame
29th August, 2014, 05:54 PM
Hi
X17 can do read-write-cks without problem.
Real read, not virtual.
Br.

bobolin4o
30th August, 2014, 11:30 AM
Galletto have virtual read for this ECU. What prevent you to use it?
Regards!

Multipla
31st August, 2014, 11:58 AM
I tested with Carprog 4.01 psg16 read e write link: Opel PSG16 diesel pump by OBDII - read/change mileage, read PIN, reset ECU. (http://www.codecard.lt/carprog/software/opel-psg16-diesel-pump-by-obdii-read/change-mileage-read-pin-reset-ecu-/prod_375.html) look here. :)

bajad
31st August, 2014, 04:47 PM
you read eeprom , it's not ecu file

djbiugi
31st August, 2014, 08:23 PM
BUt read is from OBD plug or from ecu pinout?

bajad
1st September, 2014, 06:52 AM
carprog can read OBD ,but it is immo data only - it is not ECU calibration data file.