Select map seat leon winols

[nuno_205]

I am not able to select this map (34f310)
Can someone help me.
Thank you

[betrescudan]

injection at part throttle 04DCCC 06DCCE
injection at part throttle map1 0547DC 0747DE
egr 04C114 06C116
fuel during acceleration 04D242 06D244
turbo pressure 056C9E 076CA0
overboost turbo 056FAA 076FAC
TL 04D954 06D956
TL2 04D980 06D980
TL3 04D9AA 06D9AA

[nuno_205]

injection at part throttle 04DCCC 06DCCE
injection at part throttle map1 0547DC 0747DE
egr 04C114 06C116
fuel during acceleration 04D242 06D244
turbo pressure 056C9E 076CA0
overboost turbo 056FAA 076FAC
TL 04D954 06D956
TL2 04D980 06D980
TL3 04D9AA 06D9AA

Thank you betrescudan. But my problem and edit the map 34f310

[carmageddon]

injection at part throttle 04DCCC 06DCCE
injection at part throttle map1 0547DC 0747DE
egr 04C114 06C116
fuel during acceleration 04D242 06D244
turbo pressure 056C9E 076CA0
overboost turbo 056FAA 076FAC
TL 04D954 06D956
TL2 04D980 06D980
TL3 04D9AA 06D9AA

injection at part throttle on modern diesel engine does not exist! (exist only on prehistoric diesel euro 0-1)

4dccc and 6dccc are smoke limiter control maps
547dc and 747dc are injection maps (duration)
4d242 and 6d242 are driver wish (iq request)
4d954-6d954-4d980-6d980-4d9aa-6d9aa are not torque limiter but flow limiter

many and many maps and logical are forget, if you really want to help someboby please dont use ecm to give information, is completely wrong!

[carmageddon]

I am not able to select this map (34f310)
Can someone help me.
Thank you

hex 34f310 does not exist

[betrescudan]

and where is the torch limiter?

[carmageddon]

torque is one effect of flow, iq, turbo...to increase torque you need to calculate mg, iq, smoke maps and limiter, turbo

the conversion factor for what you named TL is 0,01, the max value af this 3 maps on this ecu is 5750 x 0,01 = 57,5 (mg).
this ecu have torque max at 320 nm...if the result (57,5) are torque, as you wrote, why move up this 3 limiter to have more torque?

this ecu dont have torque limiter maps, only flow limiter

[nuno_205]

I need select this section ...

275087

[carmageddon]

you have selected the map at 4F310....and now what you need to do? i dont understand

[NASTASE]

Hi nuno_205
If you use winols,select map like that:
press Edit,Insert/Delete window,Inset new map,than "F"(Properties),on start address of map write what you want for begin of the map,fill other fields that you need and you will have a manual selected map.
275097

[nuno_205]

275376
Some maps do not come in WinOLS selected ...
4F310 (3x3) IQ by air intake temp
4C6C8 (25X14) Lauch control
51D48 SVBL