PDA

View Full Version : Golf Plus EDC16U1 map locations



andrassh
31st August, 2014, 10:11 AM
Hy! Could someone tell me the map locations on EDC16U1 (EGR, Drivers wish, torque limiter, turbo map, hot start, etc.....) ?
The car is VW Golf Plus 2.0 16V BKD.
ECU #: 03G 906 016 T

Here is the ori. file: Golf_Plus_20_BKD_ORIGINAL.bin (http://www.megafileupload.com/en/file/561689/Golf-Plus-20-BKD-ORIGINAL-bin.html)

Thanks!

andrassh
2nd September, 2014, 07:29 PM
Nobody helps?

Fec001
2nd September, 2014, 08:54 PM
Driver wish maps:
-D1A3C
-D1B3C
-D1C3C
-D1D3C
-D1E3C
-D1F3C
-D203C
TL:
-DDD7A
Turbo:
-EDCAC
Turbo limit:
-EDE18
SVBL:
-EDF64
EGR:
-D3B8C
Smoke limiter:
-DF75A
Duration:
-E88A4
-E8B26
-E8DA8
-E902A
Nm during cranking (Start map):
-F074E
-F082C
Driver's Wish inverse:
-EFFD4
N75:
-ECEB6

pablo1971
3rd September, 2014, 11:31 PM
this has got to be easy to sort 90% of those maps out very easily....

bobolin4o
4th September, 2014, 11:02 AM
this has got to be easy to sort 90% of those maps out very easily....

Yes it is... but for people with experience.

andrassh
6th September, 2014, 08:18 AM
Thanks for your help. I am trying to understand more how the EDC16 is working, what depends of what, and how the system reacts to different incoming signals.
This helps me a lot in diagnostics.
Now I am trying to figure out which are the units on those maps.
Thanks again!

Diagnosticated
6th September, 2014, 08:34 AM
This may help
https://www.youtube.com/playlist?list=PLxYpxtRjTQYJie-xnCH_Unx4l65Cu6W-r

andrassh
7th September, 2014, 02:35 PM
I have watched a lot of those videos and they were very helpful.
But I can't create the drivers wish maps (my WinOls does not recognize them).
If I make a selection I can't make it to be map, and if I click on Support map selection than WINOLS is selecting some bulls**t.
There is nothing close to D1A3C that could contain the X and Y axis, because the map should be 8*16.
Where is the start and where is the end of the first DW map??
I am confused... How to create those maps??

bondiblu
7th September, 2014, 03:03 PM
I think the problem is knowing how to use winols, and having experience to recognise that the axis data is separated from the maps.

Have a look in 2d mode at that address and you'll the drivers wish(s) one after each other. this is the map selected http://i211.photobucket.com/albums/bb94/ivandtaylor/Forum%20Pics/Capture_zps47b1a93e.jpg