Minion01
1st September, 2014, 01:03 AM
Hi Guys,
Only new here and found the forum whilst searching for a solution but hoping someone could assist.
I have a KTag Clone and am struggling to get it to read out ecus
I have tried on 2 Navara denso ecu but comes up with same error "Communication Error, please check power and connections - 0x100B"
I have verified the connections, resoldered 3 time on each ecu but no change.
Can anyone Offer some advice or insight to possible cause?
I know its a clone I bought the one that appeared to be the best quality and not the cheapest.
Thanks In advance
Only new here and found the forum whilst searching for a solution but hoping someone could assist.
I have a KTag Clone and am struggling to get it to read out ecus
I have tried on 2 Navara denso ecu but comes up with same error "Communication Error, please check power and connections - 0x100B"
I have verified the connections, resoldered 3 time on each ecu but no change.
Can anyone Offer some advice or insight to possible cause?
I know its a clone I bought the one that appeared to be the best quality and not the cheapest.
Thanks In advance