PDA

View Full Version : 2008 sprinter dpf off



dego1500
2nd September, 2014, 11:53 AM
Hi,
Please could you help with good dpf off for 2008 MB Sprinter
I have ecusafe but no good for sprinter.

Please see attached. Please help. Thanks in advance.

275474

gwee
2nd September, 2014, 11:55 AM
after programming the ecu, this vehicle need to code using mbstar too

smayer
2nd September, 2014, 09:45 PM
This file have 6 month?s age, are you sure you need dpf-off or just find this file and whant learn the solution?

dego1500
4th September, 2014, 02:02 PM
Sorry for incorrect date, my laptops date is wrong due to certain software installed.

File and request is genuine, please help.

What coding needs to be done afterwards?

oem
4th September, 2014, 02:08 PM
No need coding. Disabling DPF is enought only in flash modification. No more, regeneration, no more soot mass. No need sensors also.

dego1500
10th September, 2014, 11:20 AM
noone will help?

ominimicu
10th September, 2014, 01:24 PM
yeah i didnt knew about ecusafe and coding....
i have a solution with or without o2 sensors, hat needs no coding

16eddi67
10th September, 2014, 06:09 PM
try and report,pass PM.
disconnect connector from temperatur sensof and sensor diff.pressure
Best regards Eddy

sinan33
10th September, 2014, 08:09 PM
Hi,
Please could you help with good dpf off for 2008 MB Sprinter
I have ecusafe but no good for sprinter.

Please see attached. Please help. Thanks in advance.

275474
Ecusafe is working perfect on this ecu.
Just undo the dtc and strategy buttons after do the dpf off operation.
Then flash the file; it will work TESTED.

tunertool
10th September, 2014, 08:50 PM
LOL........

smayer
10th September, 2014, 09:04 PM
Ecusafe is working perfect on this ecu.
Just undo the dtc and strategy buttons after do the dpf off operation.
Then flash the file; it will work TESTED.
It's always good some humor

kire106ka
10th September, 2014, 11:11 PM
Yes if you whant to destroy engine use ecusafe

kire106ka
10th September, 2014, 11:17 PM
if senzors are ok just good dpf off file and reset dpf nothing more