Soot mass reset in eeprom VAG EDC16

[tomlib]

Hi, I must reset soot mass in VW Touareg 3.0TDI edc16cp34. I didn't see in vcds any adaptation (channel 12 is not available) or basic setting. I have no way to force regeneration because I got the car without physically dpf:( I'm reading ecu bdm. Ecusafe solution to reset soot mass in eeprom don't work.

Could you help me reset this in eeprom?

Thanks in advance!

[ludbe]

what if you set with autocom-new dpf filter installed?

[kospoz]

i agree with ludbe mate i use autocom for this

[tomlib]

Thanks friends for reply but BKS engine code in Autocom 2013.3 don't have optione new filter. Only regeneration...

[kazikk]

try this one.

[tomlib]

this is ecusafe solution but not work, glow plug lamp blinking and limp mode

[digi men]

If you have dpf removed physically from car, you need dpf off in flash file, than you need to do whit a diagnostic toll adapt new dpf than write new flash whit dpf off to the car.

[oem]

Channel 50 and 51 in basic setting to reset DPF

[b2s15]

autocom also for me to reset dpf

[pablo1971]

this is a easy dpf off...re write ecu with dpf off file...reset dpf settings with good diag tool...autocom-top tool...