PDA

View Full Version : Audi A6 2.5 TDI AKN 110kW MANUAL original need



Fec001
5th September, 2014, 11:48 AM
Hi!
I need ori file for this engine with manual gearbox. I have for automatic gearbox.
EDC15VP
Engine code: AKN 110kW
2.5 V6 TDI
Manual trans.
EU3
MY: 2000

Thank you!

tadeo
5th September, 2014, 11:50 AM
Look on one off my thread
Regarding Audi A4 CV immo off


Sent from my iPhone using Tapatalk

Fec001
5th September, 2014, 11:57 AM
That's not good :(

dean 21
5th September, 2014, 01:23 PM
Hi, here you have a file, split the file L.H in ols.

Fec001
5th September, 2014, 01:44 PM
I need file with size 512 KB Flash 29F400
ECU number: 0 281 010 095

bobolin4o
5th September, 2014, 02:52 PM
Here is your file.
Cheers!

Fec001
5th September, 2014, 02:52 PM
Thank you!!!!!

Fec001
5th September, 2014, 02:57 PM
Checked that. That is the same what I have. 1 software block only for automatic gearbox.

bobolin4o
5th September, 2014, 03:00 PM
Sorry... this is what i've found...
Isn't any chanse to reprogram it with ODIS?

bobolin4o
5th September, 2014, 03:07 PM
For that car, BOSCH ESI says - the ECU is 0 281 001 836
And I think, my 2000 ECU is with 2x27c010

veloseeped
5th September, 2014, 04:34 PM
For 2000 MY AKN is not possible put MT dump (from 4B0907401AA) in AT (4B1907401A) ECU
ECUs have different construction.
See pictures.
275984275985

Fec001
5th September, 2014, 05:54 PM
Ok, thank you! I tought there is no flash with manual tr. For this type of ecu. I asked it because I made tuning for this car but transmission is changed to manual.
Anyway it was the newer EDC15 with 29F400. R/W via OBD

Fec001
6th September, 2014, 10:13 AM
Yesterday called customer to tell that, it isn't possible to flash file with MT to his ECU. I did the tuning but we can't reach noticeable change. Car runs better but not the way as the client thought. I measured datas before and after tuning. All fine we reached original values when diag shows (MAF, turbo, IQ (IQ in TL,DW, Smoke)). After tuning, diag shows new higher values what I wrote, car runs better but....maybe because of big chassis. If someone knows more and can help I would appreciate it. Maybe tricking with N75 would solve my problem. I can pay for infos.

bobolin4o
6th September, 2014, 03:28 PM
So... tell the customer, that the ECU must be changed. It's not big deal - i assume it cost around 50 euro.
After that you will tune the engine for best performance...

Fec001
6th September, 2014, 05:58 PM
changing ECU not so easy because wiring harness is not the same :(. Anyway I'll find out something :) thx all for help!!!!