Mercedes Vito W639 2010 - ELV problem - emulator

[CARPARTS]

Mercedes Vito W639 / 2010

I can not turn key in EZS, ELV also don't move or make any noise
so the steering wheel stay blocked.

I removed ELV, I put emulator to the connector (12V, GND, K-line)
I can turn now the key, make contact, but engine-starter don't crank or start....

EZS Mercedes Nr = A 639 905 11 00.

Any suggestions ?

[diimon]

bad emulator

[CARPARTS]

its from carlabimmo, but maybe not suitable for 2010 models in the w639...., or does it works normally for 2010 EZS ??

[CARPARTS]

I just see inside ESL, it has NEC and not motorola...

any solution ?

[mercis]

check with star actual value eis-elv
on this eis allways bad hc908

[CARPARTS]

oke, will read this values later

....when i put second-hand ESL inside, will this work, or need it to be adapt, or only new-one ESL is possible to put ?

[mercis]

renew esl and learning to eis

[okura]

W639 using new crypto algo for ESL, emulator dont work

[CARPARTS]

The emulators from "codecard" will work in this case ? or not ?

"Carlab" don't work anyway for NEC micro's...

[ascotauto]

Hi did you find solution for this as i have nec inside esl also is it possible to read or virgin? When i fit esl with hc05 ign turns but no sync between esl ezs and ecu