bdm100 v1255

[kospoz]

Mates i am very upset with this tool.I bought it only for fiat doblo 1.3 ecu 6f3 but i have communication error!
I tried and before with galletto but nothing.This ecu is cursed :joyous: Any solution for reading this ecu please

[betrescudan]

ecu death ?

[Tdmm]

Try many times, sometimes with BDM the nedles are not having good contact.
Otherways, is it a clone? Some sw off clones are not working well. In this case I can send you one who works.
Hope you find a solution!

[kospoz]

with connection to ecu eg.6f3 mjd the manual from galletto say that we must give power to some pins.With this bdm we must give external power or not?

[betrescudan]

why you want to read it?
try to read with mpps

[kospoz]

i want to read it because i want to do dpf off

[pablo1971]

or use fgtech...this reads all mjd with obd....no need to open and bdm.

[Tdmm]

It needs 12v but to the BDM, not to the Ecu

[gwee]

Mates i am very upset with this tool.I bought it only for fiat doblo 1.3 ecu 6f3 but i have communication error!
I tried and before with galletto but nothing.This ecu is cursed :joyous: Any solution for reading this ecu please

if china bdm100 work out of the box, many of us will be out of business lol

[vasycara]

why you want to read it?

try to read with mpps

mpps not read good this ecu-marely 6f3.
mpps write good this ecu by obd.

[kospoz]

mpps not read good this ecu-marely 6f3.
mpps write good this ecu by obd.
so i want 2 different tools for this job?

[vasycara]

so i want 2 different tools for this job?

For this ecu bdm100v1255 clona vork good read-write in bdm.
Galetto2 read-write good this ecu obd and bdm.
mpps read bad,write good this ecu.