Nissan March/Micra 2012 - rear dash pinout

[Geryy]

Hi to All. Help find rear circuit pinout for this dash. (93C66)
thanx

Here Photo:

276912

[claudio35]

disarmed, try searching with multimeter in continuity, stepper motor that is easy to damage when removing the needles

[Geryy]

Motors like on mazda, very fragile.

[diagtech2000]

i thought the same about removing the needle on a 2013 one of these so i took it to my pal and he just spooned it off, no damage to motor, everything worked fine

[claudio35]

I have a tool to remove needles, I do not take risks

[Geryy]

What a tool?

[rikko]

A fork is better than a spoon

[claudio35]

A fork is better than a spoon What a tool?


Neither one nor the other.

[Geryy]

It need remove hood from needle?

[claudio35]

It need remove hood from needle?

Yes.......

[moto111]

Would someone that has done one of these would they mind kindly sharing the pinouts from the rear Please...

[skens]

hi
pinout
http://www.digital-kaos.co.uk/forums/showthread.php/286194-Dash-pin-to-all-speed-pulse-Eeprom-backup?p=2576479#post2576479
regards

[Geryy]

To this dash no rear pinouts from other side, only remove nails.

[moto111]

My apologies Imeant to say solder points from rear of dash please 2012 micra

[moto111]

Has anyone solder points from rear of this dash as above please 2012 micra, dont want to mess up the motors if at all possible

[mawar]

Dash no rear pinouts 93c.....This is easy to remove the needle,,use tweezers or a fork > :eating:


http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=326348&stc=1

[zckariya70]

No needed any tool to remove the needles. Just rotate the needles in clockwise and pull the needles, its easy :)

[Geryy]

Maybe Counter-clockwise ?

[moto111]

Needles off twist anti-clock wise job done no emergency, no panic, just plain old method

[napel]

need dump for this dash if somene has please share, thx in advance

[rm23]

thanks forum, just done one today, easy ;)