FAULT CODE REMOVING PLEASE-P0234-TURBO OVERBOOST

[pablo1971]

hi.

VAUXHALL ASTRA-80BHP
0281011380

370433

EDC16


can anyone remove the fault code P0234-turbo over spin.and also will the limp mode that goes with it please

277292

[kire106ka]

These is not solution of the problem overboost must be repaired find the problem and fix it

[pablo1971]

CAR HAS NOT A PROBLEM...ECU HAS BEEN TUNED.AND TURBO IS RUNNING A BOOST CONTROLLER...NUY NOW AND THEN..OVERBOOST CODE APEARS AND LIMP MODE.


sori for caps.

[morgano]

Then i guess the tuner should adjust limiter in ecu to avoid entering overboost limp mode.

[pablo1971]

will check the file.thanks

[smokey08]

The map sensor can't read high enough. You could get round this by changing the upper signal range check to a value more than 5000mv.

Best solution would be to fit a sensor with a higher working range and change the linearisation in the dump.

[pablo1971]

thanks for the replp smokey...i will give this ago.

[smokey08]

I would try address C672A. Change it to 1043 and try it.