PDA

View Full Version : Mercedes sprinter dpf help edc16cp31



seba_m_
15th September, 2014, 10:02 PM
Hi friends. I have a problem with a mercedes sprinter EDC16CP31, turned off the switch dpf but the car after driving a few meters smokes white. help someone solve the problem? Annex map with the removed filter.

Thanks

Alexuko
15th September, 2014, 10:41 PM
Swiftec solucion

Alexuko
16th September, 2014, 10:13 AM
277480 Good solucion)

seba_m_
16th September, 2014, 11:46 AM
Thanks mate. It does not work. Next smokes white.

Alexuko
16th September, 2014, 01:51 PM
I have done it yesterday, in the same car. Swiftec works 100 %...Test Head Gasket)))

FastFurious
16th September, 2014, 03:48 PM
turbo for this car is ok?

seba_m_
16th September, 2014, 09:48 PM
Turbo and seal 100% ok.

pinotec
17th September, 2014, 07:30 PM
try this file no cks

seba_m_
18th September, 2014, 06:26 AM
Do not sent me the password.

Artilect
18th September, 2014, 06:41 AM
Check with diagnosis if regeneration it's active.

And if it's like you told, that smoke white after right after you start the car, then it's not regeneration, since the car it's not hot yet.

I think you have some other problem. If the cooling water it's not going away (EGR cooler, head gasket,...) you have problems with injectors, MAF,...

BR and good luck

augustinbz
18th September, 2014, 09:38 PM
replace injectors mate...100% this is the problem.
sprinter and crafter have this problem in 99% of cases.