honda hrv immo off

[autocheck]

please need immo off for this ecu . Inside immo board looks like in picture. On this board is 28pins processor with label.

http://hz01.i.aliimg.com/img/pb/315/297/982/982297315_689.jpg

[autocheck]

anyone with information pliz help , have this car stuck in my workshop.

[metercar]

*off topic*

Half Rare Vehicle

No tested
A street myth is dentist solution

[luisblas]

hello friend, more details ecm

[autocheck]

Its a Keihin 37820-PEL-G11 . AE 1312-103315

Sent from my Android using Tapatalk

[niki85]

remove immo board then find in ecu eeprom (i think 93c56) and program all FF but last two row don`t touch, maybe u will must bypass starter,
if car start try to pass 3500rpm, if work u are done, if don`t pass 3500rpm, try to play with eeprom dump and FF`s.

good luck

[okura]

use emulator

[autocheck]

Thanks dear will advice.

Sent from my Android using Tapatalk

[autocheck]

Thanks started but need a bit of FF editing how best can I do it?

Sent from my Android using Tapatalk

[caliskan71]

use launch only for repair (easy way for all honda series)

[autocheck]

remove immo board then find in ecu eeprom (i think 93c56) and program all FF but last two row don`t touch, maybe u will must bypass starter,
if car start try to pass 3500rpm, if work u are done, if don`t pass 3500rpm, try to play with eeprom dump and FF`s.

good luck
thanks mate, car started but not going above 3500rpm, where do I start when playing around with ff in the eeprom?

Sent from my Android using Tapatalk

[deondti]

Has someone solved this yet?