Kawasaki ZX800 key

[honczek]

Hi,
I have a problem.I have tag key tool and I need make key on kawasaki,
but eeprom in ecu is 93c86 and is not 93c66.I need from this ecu dump make key dump.Tag key tool does not understand bigger eeprom than c66 on kawasaki.I need any data to program or any other help....please...

Thank You

Dump from ecu 21175-0789

c86 16.bin | Ulo?.to (http://uloz.to/xHHZF113/c86-16-bin)

[gwee]

learn how to attach the dump here first

btw, this bike no need tools, can add by hand

[leandroks]

As gwee said upload your dump and sure someone can help u....

[honczek]

Here is it...thank you

278344

[gwee]

...........key data?

[honczek]

I have not any key....data can has from empty transponder?Dump is OK? Thank You

[gepakg]

NO,you must have key orginal for kawsaki bikes,now you will ask what that mean??? it mean that you have properly programmed 4D transponder page4 5 bytes for kawsaki slave or master key

then put on forum serial id and manufacturer code then will be done

also be care that on some new models on kawsaki have 2 x eproms c86,and dumps are chskumed and manualy very hard to put it:)

regards Gepa


I have not any key....data can has from empty transponder?Dump is OK? Thank You

[gwee]

NO,you must have key orginal for kawsaki bikes,now you will ask what that mean??? it mean that you have properly programmed 4D transponder page4 5 bytes for kawsaki slave or master key

then put on forum serial id and manufacturer code then will be done

also be care that on some new models on kawsaki have 2 x eproms c86,and dumps are chskumed and manualy very hard to put it:)

regards Gepa

checksum difficult for u ?? lol

[gepakg]

sorted few months until is included in first bike:)

but this is very rare...also we can make transponder by dump and anything to touch in dump then chksum stay same:)

many solutions in our heads:)

regards Gepa


checksum difficult for u ?? lol

[honczek]

I dont know where I can have kawasaki key...It can be key from other bike??I still dont know where is problem with master or slave key- they have any special code ? I thinked that from dump You make data to transponder or from transponder You modify the dump.I have not any key and I cant have them...I can have only blank transponder...thank You

[gepakg]

you must find slave key no matter if it is used from any kawasaki,post page3 i will include in your dump

to generate key from dump on tpx2 or ys-01 cant explain how to do,it is harder more than you think

regards Gepa


I dont know where I can have kawasaki key...It can be key from other bike??I still dont know where is problem with master or slave key- they have any special code ? I thinked that from dump You make data to transponder or from transponder You modify the dump.I have not any key and I cant have them...I can have only blank transponder...thank You

[honczek]

OK thank You for small explanation...I will have 4D60 from Z1000,then I will send screen shot from tag key tool...
Thank You

[gepakg]

if you have from z1000 properly coded for kawasaki then will be 4D-62 not 4D-60...anyway post all data from key

regards Gepa


OK thank You for small explanation...I will have 4D60 from Z1000,then I will send screen shot from tag key tool...
Thank You

[honczek]

Hi I maked key to zx1000 but, dont start....It was id60...This picture is production key id62 maked with TagKT to kawasaki...Its possible write this to dump?


Thank You very much...


282151