2012 ducati panigale 1199s

[gaxi]

Hello guys a have this ducati with no keys and i see that tmpro2 with module 182 can read it motorola 9s12p128 the problem is i dont have any motorola component in the antenna i found a 8 leg eeprom on it , maybe somebody have any idea how can i make a key for it.

Thanks in advance

Maxi

[gepakg]

:) you want to play with ducati,for sure it is zadi immo type2 and motorola 9s12p128 inside,leave it,it is my friend opinion because you dont recognize eeprom or mcu...

regrads Gepa


Hello guys a have this ducati with no keys and i see that tmpro2 with module 182 can read it motorola 9s12p128 the problem is i dont have any motorola component in the antenna i found a 8 leg eeprom on it , maybe somebody have any idea how can i make a key for it.

Thanks in advance

Maxi

[gaxi]

Yes Bogi from tmpro2 send me instructions how to make it with module 182 but the problem is that module is crazy expensive if I need to buy this module I will be loosing a lot of money on the job and I really don't know when I will have another 1199s with no key

[gepakg]

then if you not make money with this job,leave it...another friend opinion:) your customer know how much it cost in ducati service and how long it try???

regards Gepa




Yes Bogi from tmpro2 send me instructions how to make it with module 182 but the problem is that module is crazy expensive if I need to buy this module I will be loosing a lot of money on the job and I really don't know when I will have another 1199s with no key

[54321]

There will be nobody else in your area that can make a key for that bike so charge the customer the same price as the module and then you've got the module for free for future use

[gaxi]

Good point like always

[gepakg]

i can make present for you for free:) you read 9s12p128 it is simple job on 4 wires and i will give you code from dump to start bike with any key,called `emergency start`,so will run as air,but only what i ask for you simple job,read mcu,4 wires...

regards Gepa


Good point like always

[gaxi]

Ok Gena that mcum 9S12P128 it's not on the antenna so will be in the cluster?

[gwee]

i can make present for you for free:) you read 9s12p128 it is simple job on 4 wires and i will give you code from dump to start bike with any key,called `emergency start`,so will run as air,but only what i ask for you simple job,read mcu,4 wires...

regards Gepa

you are here, no wonder these days not getting many Ducati lol lol

[gepakg]

no,exactly in antenna ZADI is mcu,4 wires,Vdd,Gnd,bdm,reset...dont be lazy,its pcb 5cm x 5cm:)

regards Gepa


Ok Gena that mcum 9S12P128 it's not on the antenna so will be in the cluster?

[gaxi]

I hope one day to have your degree of noleg but I am just beginning to get into bikes. I'm not afraid to dig into it but with a little bit more help on diagrams and equipment. I really appreciate the help that you provide me

[gwee]

I hope one day to have your degree of noleg but I am just beginning to get into bikes. I'm not afraid to dig into it but with a little bit more help on diagrams and equipment. I really appreciate the help that you provide me

you are lucky to get help from gepa, he is the guru for bikes in europe :)

[gepakg]

i am glad to hear that from you,it means more to me:)

regards Gepa


you are lucky to get help from gepa, he is the guru for bikes in europe :)

[54321]

get a room :love_heart:

[gwee]

you jealous? lol

[gepakg]

:top:............

[zyjekrc51]

gepakg rules!!!!!!!!!!!!:rock:

[MACKIE]

gepakg (http://www.digital-kaos.co.uk/forums/members/133471-gepakg/) & gwee (http://www.digital-kaos.co.uk/forums/members/352471-gwee/)

I'm jealous too :biggrin::biggrin::biggrin::biggrin::biggrin:

Regards
Mackie

[gepakg]

we will get room for 3 persons:)

regards Gepa


gepakg (http://www.digital-kaos.co.uk/forums/members/133471-gepakg/) & gwee (http://www.digital-kaos.co.uk/forums/members/352471-gwee/)

I'm jealous too :biggrin::biggrin::biggrin::biggrin::biggrin:

Regards
Mackie

[ray-ray]

Make sure there soap on a rope.

[gaxi]

Lets go back on track please , I know I can use tmpro2 to read it but can something else read it.?

Thanks in advance

Maxi

[igorr]

it is 9s12 what do you mean what can read this mcu:joyous:

[gwee]

..............................:goodpost:

i am worried for the owner of the ducati...................lol

[gepakg]

new sw & hw UPA for sure,dont know newer version of xprog-m,it must be extactly 9s12p128 --- D flash...

regards Gepa


Lets go back on track please , I know I can use tmpro2 to read it but can something else read it.?

Thanks in advance

Maxi

[JOHNCICY]

i can make present for you for free:) you read 9s12p128 it is simple job on 4 wires and i will give you code from dump to start bike with any key,called `emergency start`,so will run as air,but only what i ask for you simple job,read mcu,4 wires...

regards Gepa
Hi i have same bike DUCATI DIAVEL 2013 with push start handfree kindly show indicate how to read incircult with four wires
i need emergency code start as weell Thanks.

[gepakg]

big difference between these 2 bikes,panigale 1199 have simple key with 4d transponder,if he is not present or something other wrong he need 5 digits pin for emergency start,otherwise ducati diavel have keylessgo system maked by zadi on very small pcb down the start button,inside have 24c04 but very hard job to read it,you will all see when open it,when you want to make key must have big knowledge or easier way to pay bogi 800 eur:-) and when you pay also remmber what i say,very hard to read 24c02 inside

regards Gepa


Hi i have same bike DUCATI DIAVEL 2013 with push start handfree kindly show indicate how to read incircult with four wires
i need emergency code start as weell Thanks.

[JOHNCICY]

big difference between these 2 bikes,panigale 1199 have simple key with 4d transponder,if he is not present or something other wrong he need 5 digits pin for emergency start,otherwise ducati diavel have keylessgo system maked by zadi on very small pcb down the start button,inside have 24c04 but very hard job to read it,you will all see when open it,when you want to make key must have big knowledge or easier way to pay bogi 800 eur:-) and when you pay also remmber what i say,very hard to read 24c02 inside

regards Gepa
Thanks Gepa i will be posting the ignition while opened and pictures tommorow.thanks

[gaxi]

In the end I finish the job with tmpro2 I am very interested to see the pics for that job.

[gepakg]

as i said panigale 1199 with tmpro2 can do children`s how much is easy,but diavel is different story,also multistrada,till you open it can`t see what you expect:-)

these 2 bikes only have same the name all other is different

regards Gepa


In the end I finish the job with tmpro2 I am very interested to see the pics for that job.

[gaxi]

Gepakg thanks for your help, but I think we are here in dk to help one to another ether with advice for experienced in the field or any other way , if every post I have I will have a answer like it too complex or too difficult nime as well better close the business, when I have the opportunity to help with my expiriens or ideas I will, and never discorague some one and say it's children play because one day u and everyone else here will need a hand and I don't think u will want someone tell in you the same.
Just my 2 cents

[gepakg]

you want to teach me about that,sorry i am in this bussines more than 22 years,and your job that you make panigale is soldering 4 wires and put transponder in tool,i am realy sorry but it is childrens job as i said,and my help is that i make you preapre to be care what are you doing with zadi diavel/multistrada keylessgo system becauase soldering of 2 wires go on 2 legs on 2 pins ultra small MCU ,when you open it you will see how it job like!!! dont remember that i offer you only to sold 4 wires and i will give instantly for you emergency start code,and you didnt do it,and tell me that i am not helpfull,ok now i want to see your help in this thread but me leave alone!!!

and for the end as my good friend GWEE read your post and said to be scared for owner of bike panigale 1199 you want to do ,all said about you

please dont teach nobody about help because your score is Thanked 0 Times in 0 Posts!!!

dont regards for you

Gepa


Gepakg thanks for your help, but I think we are here in dk to help one to another ether with advice for experienced in the field or any other way , if every post I have I will have a answer like it too complex or too difficult nime as well better close the business, when I have the opportunity to help with my expiriens or ideas I will, and never discorague some one and say it's children play because one day u and everyone else here will need a hand and I don't think u will want someone tell in you the same.
Just my 2 cents

[gaxi]

All I can say it's u need to have a huge front door to fit your ego I am in business a little more than u but I just start doing motorcycle and I will never post the way u do but like always first impressions never lie as for u I wish u the best of luck with that attitude I only fell sorry for the your customer's.

[gepakg]

as GWEE said:

..............................:goodpost:

i am worried for the owner of the ducati...................lol

please dont disturb all of us,your score is 0 thanks and you want to teach somebody

again,no regards

Gepa


All I can say it's u need to have a huge front door to fit your ego I am in business a little more than u but I just start doing motorcycle and I will never post the way u do but like always first impressions never lie as for u I wish u the best of luck with that attitude I only fell sorry for the your customer's.

[MACKIE]

@gaxi

Ego comes with knowledge believe me....the world is full of freebaggers....and lamers....so why helping them and argue with them..... i doubt you work longer then gepakg...and i doubt you gave 800e for TMPro module...
My second opinion and i see by your post that you dont share your knowledge only ask for help...so where have you been all these years ?

Mackie

[gaxi]

Doing commercial residential access control safes and auto, u guys are way more advanced then us here in North America ,I was like a lot of people full with ego and I was thinking nobody knows more them me and then karma take care of me since then if I can help anyone I will and the last think I need it's a thanks for it, if u really help someone the last think you want is a thanks for it the simple act of helping need to be enough, and for most people is I hope I can help on my 1% nolegue and If I do the last think I need out of it is a thanks

[Recoder]

@gaxi .
Dont want to get into a war but read the written words !!!!!!!!and i think you may have jumped the gun a little mate .
Help was forth coming by the looks of it and replys to your q,s.
gepakg was trying to help you not upset you it the way i see it .
Wished i had his and gwee,s knowlede.
You have info on tap here so whats the problems a couple of maybe misplaced word,s..
Sleep on it and re read all stuff in thread .

Just my thoughts and observations .
No offence intened regards Recoder

[gaxi]

Thanks Recoder I will

[Recoder]

Your welcome .

[John72298]

I had used the tprom2 to programe the key... bike can star

[Monkeyboysrevenge]

Hello,
I'm in the same position. I buy a badly crash 1299S and thanks to salvage guys they scrapped (ignition and keys also) the frame as per rules for uk Cat B Insurance scrap Bike.
Also when bike was left outside in winter, they leave good dash on floor and now is waterlogged and broken, scrap. Now I have another good 1299S dash to use, But no ignition, no keys and I have insides of waterlogged clocks.

So,
I also need to findout / Help to start bike without keys or ignition only with a ON/OFF Switch for racing the bike. So is possible you guys can help me please ...
Now

[gepakg]

i reply it in immo section about this bike is equipped with ZADI immo based on 9s12p128 mcu and used 4d-60 transponder,immo off that you want is impossible mission for now

please read forum rules for DK and dont make few posts and questions for same problems...

regards Gepa


Hello,
I'm in the same position. I buy a badly crash 1299S and thanks to salvage guys they scrapped (ignition and keys also) the frame as per rules for uk Cat B Insurance scrap Bike.
Also when bike was left outside in winter, they leave good dash on floor and now is waterlogged and broken, scrap. Now I have another good 1299S dash to use, But no ignition, no keys and I have insides of waterlogged clocks.

So,
I also need to findout / Help to start bike without keys or ignition only with a ON/OFF Switch for racing the bike. So is possible you guys can help me please ...
Now

[Monkeyboysrevenge]

Thankyou.
And I'm sorry for so many of same posts. :)

[gepakg]

you can freely copy st24c512 from damaged to new one,or if you have another 1299 you also can complete without problems damaged bike...

regards Gepa


Thankyou.
And I'm sorry for so many of same posts. :)

[Protech locksmi]

Can you please help me sir, i have ducati 899 and I have dflah dump from zadi. I try to make key with vvdi2 and tango and neither start bike. I types pin code 1234 in bike and I also see 1234 in my dump and it allows me to get pass pin code screen on bike but I'm not sure if that's correct. Please help

[motorbike59]

gepa is the top