Dreamboxedit and PLI Jade (enigma 1)

[on_the_jazz]

I'm using dreamboxedit 3.0.0 but cannot get PLI Jade 2 (DM500) to recognise my uploaded bouquets.
I've made sure its being uploaded into /var/tuxbox/config/enigma, and I've even tried changing to version 2 and version 3 settings.
Does anyone here use this image? I restart enigma after uploading since there is no channel refresh option.
What am I missing?

edit: I just downloaded the settings from box and it has saved my bouquets, but it just doesn't show them on the box :( (unless I saved them in the wrong place).

[on_the_jazz]

I used bouquetter instead and that worked.

[alunfennell]

Tell me how does it look ? I have yet to see any screen shots of the Jade 2 image ...

I did not realy like the previous version .... Hopefully this one look a little better.

Regards:
Alun

[on_the_jazz]

Looks pretty much the same as Jade 3 :p Its nice, but it annoys me you have to press OK twice for the bouquet list. Will post some pics up tomorrow.

[.: JaCkPoT :.]

I prefer pressing ok twice as i hate looking for the info button when i need to know what time it is ..lol

[on_the_jazz]

I couldn't work out how to bring up the menu while streaming so I used my phone camera to take a few shots. Sorry if they suck :p

http://img139.imageshack.us/img139/2766/en1.jpg

http://img188.imageshack.us/img188/7687/en2v.jpg

http://img401.imageshack.us/img401/1735/en3.jpg

http://img15.imageshack.us/img15/6210/en4d.jpg

http://img401.imageshack.us/img401/4702/en5.jpg

[rickets]

I have exact same problem, I have a lovely set of bouquets ready to go but its refusing to display them on a 500-s.

[on_the_jazz]

Save the channels.
FTP them across.
Press the reload button.
Once reloaded, ftp again.
Hit reload button again.

Credit to ruddyrum from digitalworldz.

[bubbles69]

Right OK it sounds weird but what you have to do is when you push the blue bouquets button, you will see favourites tv and last scanned these must be deleted otherwise for some reason they wont upload, so make sure blue bouquet button is empty,

in dreamboxedit 3 toggle to type 2..

ftp send and restart enigma

if still not displayed check blue button is empty and repeat again,,

this is the 100% solution,

remember the thanks button..

[Curious123]

If you want to send bouquets to an Enigma1 box then you are better off using Dreamboxedit 2.0.0. If you have an Enigma2 box then use Dreamboxedit 3.0.0.

[rapscallion]

I use dreamset 2.29 with no problems on Jade(or anything else really)

[Rickh Hoe]

Hi Guy's I have tried all of the above on many different versions of DBE....don't know what else to Try.

I Have a DM500-s with PLI Jade and I'm trying to send channel list across but keep getting error message:

Connected.
Dreambox response: Login successful.
** Getting directory list /etc/enigma2/* **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/lamedb" **
Starting FTP transfer
Transfer aborted
Error sending file "lamedb" to the Dreambox.
Disconnecting.
Disconnected.

Can anyone advise what I'm doing wrong?

Thanks

[dave-h]

Hi Guy's I have tried all of the above on many different versions of DBE....don't know what else to Try.

I Have a DM500-s with PLI Jade and I'm trying to send channel list across but keep getting error message:

Connected.
Dreambox response: Login successful.
** Getting directory list /etc/enigma2/* **
Starting FTP transfer
Transfer complete
** Sending file "/etc/enigma2/lamedb" **
Starting FTP transfer
Transfer aborted
Error sending file "lamedb" to the Dreambox.
Disconnecting.
Disconnected.

Can anyone advise what I'm doing wrong?

ThanksYou're using Enigma 2 settings, when you should be using Enigma 1 for a DM500s - Guide for DBE below

http://www.digital-kaos.co.uk/forums/f39/dreamboxedit-guide-167275/#post815193