Fiat Panda 2008 IAW4AF

[ngt84]

Hello there
I tried Reading the ECU Engine Data with MPPS which is from a Fiat Panda Petrol 1.2 8v 2008 IAW4AF.
Gives 320kb file, while the internet bins are 304kb...
I succesfully flashed it back and enrichened the mixture with winols but i get a dashboard fault light and with Diagnostics it displays "ECU Error"
I reflashed the original back and it works.

MPPS says it does the checksum automatically, but i guess it doesnt....
What tools do you use for this particular ECU ?


278847

[betrescudan]

petrol engines...fiat....allways probblems....lambda,cathalizator,dpf,....stay away please with tuning this

[ngt84]

Actually this is my car so i would like to play with it ;)
I didnt have any problem to enrichen the Fuels, its just the dashboard light showing an "ECU Error" right when i just turn the key on...
The MPPS has the IAW 59F option only for this Vehicle, maybe thats the culprit ?
It has only one Catalyst, with two lamdas and it goes open loop at full throtle.
See my wideband readings as stock
http://www.youtube.com/watch?v=FidshWvHGbs (https://www.youtube.com/watch?v=FidshWvHGbs)

[betrescudan]

try galletto 54 to write

[betrescudan]

you worked and lambda map?

[ngt84]

No, no need for lamda map, for me. Closed loop is fine @ 14.7 - 14.8
Played only with Fuel @ WOT and i got it a bit richer than i wanted ~12.3-12.8
But i was scared from the Error so i switched it to stock....
I also played with the Ignition but it is already too agressive from the factory... I already see ignition cut as it is....
Here is the stock avance after the 2nd or 3rd pull....

[betrescudan]

i think is a good result...diagnose with tester what said?

[ngt84]

MULTIECUSCAN showed ECU Error, but no visible hiccups, obviously a checksum error....
Reflashed the original file and it worked without errors...

[OVERSPEED]

As long as I know the problem was using 59F option... CKS was wrongly calculated

[ngt84]

Sure but what program - flasher tool combo should i use ?

[harman1363]

As already mentioned try with Galletto, it should do it without problems

[antonis132]

Hi i need flash file for this engine. Could you upload it?