PDA

View Full Version : Corsa 2007 Electric wing mirrors not working



super jumbe
27th September, 2014, 12:19 PM
Hi, does any ones know if it?s related to fuse or relays customer says just stopped working, so putting it down to a fuse...
The Vauxhall manual, nothing listed for wing mirrors fuses?? like to know the hidden ones.

Any help much appreciated.

Meat-Head
28th September, 2014, 02:57 PM
Wing or door?

count no of wires. Gues five. The isf. V.

Gnd. Heater. Vthred. Three to motors

super jumbe
28th September, 2014, 03:29 PM
Thanks Meaty, stripped front doors to bare metal all wires motors no power coming, will not be spending more time on this shite job on Monday, time is money, what’s all this about Heater?

Meat-Head
28th September, 2014, 07:36 PM
Heater to defrost when cold as ice.

not familiar with that car, but it is basically a spirito de punto, see if you can see mirror switch in bcm been operated.

is the switch working?

the_riddler
28th September, 2014, 07:42 PM
not all but most heaters take there power from HRW, power supply for mirrors normally fused at fusebox and then heads to switch where power then sent to relevant motors

super jumbe
28th September, 2014, 08:06 PM
not all but most heaters take there power from HRW, power supply for mirrors normally fused at fusebox and then heads to switch where power then sent to relevant motors

Fuse any idea or location were I will find, as no power any way near mirror...

Meat-Head
28th September, 2014, 08:29 PM
Is there an iuytsarsiin (iShit Failiure) out station (iShit Failiure) .......

In each door

the_riddler
29th September, 2014, 08:31 PM
Again not certain about this one, but would have though only power at switch, until you press switch, then power sent relevant motor.

the_riddler
29th September, 2014, 08:53 PM
Found this
on FIRST picture it shows FU33 as mirror fuse

Fuse Box Info (http://www.ukcorsa-d.com/forum/showthread.php?45988-Fuses-and-Relays)

edit
sorry i never checked year but i think this is correct

super jumbe
30th September, 2014, 12:50 PM
Got rumours from friends and they told me the BSI has got corrupted for some reason, you need to programme BSI, any idea how?

Meat-Head
30th September, 2014, 02:02 PM
Try opcom see if has option for power motd tries (iShit Failiure) mirrors