Aprilia RSV-1000 with Zadi immobox

[lpf01]

Hello Guys!

I got a ZADI immobox from an Aprilia RSV-1000 last week, is it possible to make the transponder with some tool?

Do not see anything what can do this like tmpro or Tango....

So can you give me some hints about it?

Thank you!

[Master01]

At this moment - not possible.

Remove Immo - possible !!! :P :P

[lpf01]

Than can you help me out with it please ? :)

[simaservis1108]

He won't :D

[gepakg]

thats old type one,ZADI immo with inside 68hc908QY_QT...read them,you will get key data for T5

regards Gepa


Hello Guys!

I got a ZADI immobox from an Aprilia RSV-1000 last week, is it possible to make the transponder with some tool?

Do not see anything what can do this like tmpro or Tango....

So can you give me some hints about it?

Thank you!

[gwee]

that's the different between a master and time wasters lol

[gwee]

At this moment - not possible.

Remove Immo - possible :P :P

not impossible to you maybe lol

remove immo possible but i won't tell = better don't post lol

[lpf01]

I like that type of peoples who is in a communty just to tell how big master is he, and everybody elve will die stupid.... high five gwee :)
Than i will try to read it out.

[simaservis1108]

not impossible to you maybe lol

remove immo possible but i won't tell = better don't post lol

remove immo possible but i won't tell = I will tell but for certain large amount of money.

I asked him once he said something like that via PM,price was 700 or 800 euro for solution.

[simaservis1108]

thats old type one,ZADI immo with inside 68hc908QY_QT...read them,you will get key data for T5

regards Gepa

What programmer can read this?

[gepakg]

my contribution how to read it:)

279312

regards Gepa


I like that type of peoples who is in a communty just to tell how big master is he, and everybody elve will die stupid.... high five gwee :)
Than i will try to read it out.

[PremierD]

"I asked him once he said something like that via PM,price was 700 or 800 euro for solution."......... :banghead:

You wouldn't happen to have a copy of that PM mate ..would you ......:)

[Master01]

simaservis1108 (http://www.digital-kaos.co.uk/forums/members/388275-simaservis1108/) talking to me? what is the problem?

[gwee]

simaservis1108 (http://www.digital-kaos.co.uk/forums/members/388275-simaservis1108/) talking to me? what is the problem?

everyone understood what he said lol he said u asked $$$ for solution lol

[Master01]

gwee (http://www.digital-kaos.co.uk/forums/members/352471-gwee/) :D and
đđĐđß$đĐßđßđßđđääđłldkf>>;*;ßßߤߤ;>>;>ßߤ]$ß$÷÷×ßß]¤¤¤]ß$$[ß[¤ĐĐß[ß...



---------------------------------------------------------------
simaservis1108 (http://www.digital-kaos.co.uk/forums/members/388275-simaservis1108/)

You and I will send password to moderator.
Moderator check all PM.
It turns out that you're lying.
You will banned. Not a good idea?
Do you have any other ideas? :P :P :P
Or are you asking for forgiveness. You can correct the post. And forget all.

[gwee]

gwee (http://www.digital-kaos.co.uk/forums/members/352471-gwee/) :D and :D

simaservis1108 (http://www.digital-kaos.co.uk/forums/members/388275-simaservis1108/)

You and I will send password to moderator.
Moderator check all PM.
It turns out that you're lying.
You will banned. Not a good idea?
Do you have any other ideas? :P :P :P
Or are you asking for forgiveness. You can correct the post. And forget all.

..................me too ?? lol i simply explaining to you what he said...........ban me too ??? lol lol

[gwee]

@ simaservis1108

if you have proof, send to moderator, otherwise u owe him an apology !!

[Master01]

đđĐđß$đĐßđßđßđđääđłldkf>>;*;ßßߤߤ;>>;>ßߤ]$ß$÷÷×ßß]¤¤¤]ß$$[ß[¤ĐĐß[ß...

[simaservis1108]

I don't have it in my inbox,but I will find it through my email if needed,reason being I have limit of PM's that I can hold.
I don't call for bans,I just say what is the epilogue when he says that.
Our PM was about Moric Type 2 immo programmer.

Also every bike immo off that I looked at in IMMO subforum,you told solution exists but not for free,so don't play dumb with me.
I happen to have deleted that PM because of more important ones,and also because I don't want to be a reason someone gets banned,it doesn't matter to me.
Either say something useful or don't say anything at all.

[MACKIE]

that's the different between a master and time wasters lol

Hehe (C) Crew

Regards
Mackie

[RFRemotes]

Once upon a time I was interested on making K-line (or like) interface to R/W these sealed immo boxes and I managed to do this for several.
They all have K-line for reprogramming and some even for live data.
No need to argue here. I just need one of these HC908QY/QT and will solve your problem mates. No matter if the cpu is secured or not.

[Cromwe11]

I have a Zadi immo boX with MC68HC908QY4 does anyone have the security bytes for this MCU :questionmark:

[Bllinda]

What programmer si MCU reads? Can i PM

I have a Zadi immo boX with MC68HC908QY4 does anyone have the security bytes for this MCU :questionmark:

[Cromwe11]

Read with Orange5 but only getting AD AD AD........... as I don't have the correct ss

[kevfield]

did you try to scan for ss with your orange 5?

Thanks Kev

[Bllinda]

So hyped programmer does not read $.S.S ? Only use hc0.8se.c.ini file ....

[Cromwe11]

Doesn't give the option to scan for the ss on this chip. Only to go through the list of known ss

[Bllinda]

Maybe the only missing license? Is there who know something about it?

Ora.nge.5 License M08V 20.11.20.15

90xAB.32,90xAP.32A,90xGP.32,90xKX.2,90xLJ.12,
90xLK.24,90xQC.16,90xGR.16A,90xGR.48A,90xGZ.60

Or reads QC QY?

[Eppiotic]

Maybe the only missing license? Is there who know something about it?

Ora.nge.5 License M08V 20.11.20.15

90xAB.32,90xAP.32A,90xGP.32,90xKX.2,90xLJ.12,
90xLK.24,90xQC.16,90xGR.16A,90xGR.48A,90xGZ.60

Or reads QC QY?
I used the M08V to try and scan the HC908QY in my Can-Am Spyder DESS Module I have as an on-going project and it just keeps cycling through its known values in a random pattern. It seems to be drawing from a bank of numbers and I saw the same numbers being drawn up several times within the course of an hour. That being said, I let it run over night for 2 days with no success on this. No Joy.