[Help please] BMW EWS tryed to read the 2d47j

[tepmehatop]

Hello,
:blue: by ews editor tryed to read the 2d47j
How to restore now this EWS?

I read that i need to reset to factory.
Then input the Vin, Milage and coding..

Vin and millage i know, but where i will take other?
And what i need to do next? I have BMW scanner and Inpa.

May some one can explain step by step :grey::grey:

Thank's A lot!

[PremierD]

Post the dump you have mate .. lets see what you have ****ed up ..:)

[tepmehatop]

Post the dump you have mate .. lets see what you have ****ed up ..:)
Sorry, but i don't have the dump, becouse i used the EWS Editor :(
My stupidity did not pay attention 2d47j.

[PremierD]

Oh dear......

[tepmehatop]

Some ideas? i all time used EWS Editor, about 4 years, and only today i stack with this car.....

[PremierD]

cjawahir (http://www.digital-kaos.co.uk/forums/members/106566-cjawahir/)

bram380 (http://www.digital-kaos.co.uk/forums/members/67678-bram380/)


those members are your best bet to ask mate

[aassfour]

get a used ews3 make keys to it , virgin ecu and alignment , or get dumo for ur ews from here in dk and make write it into it and make keys
or use an emulator

[paul_12345]

get a used ews3 make keys to it , virgin ecu and alignment , or get dumo for ur ews from here in dk and make write it into it and make keys
or use an emulator

how hard is it to get ISN from ecu and create file to write to ews???

[adam28]

For someone who dont know, its very very hard.... lol

[bram380]

Hello,
:blue: by ews editor tryed to read the 2d47j
How to restore now this EWS?

I read that i need to reset to factory.
Then input the Vin, Milage and coding..

Vin and millage i know, but where i will take other?
And what i need to do next? I have BMW scanner and Inpa.

May some one can explain step by step :grey::grey:

Thank's A lot!

Please don't read EWS3 (mcu 2D47J) with EWS Editor (K-Line).
Original data will erase and you can't restore it.

Xprog, UPA, Orange can read/write this mcu, but you have to remove mcu from board.
And use 2D47J adapter.

[smokey08]

Post last 7 digits of your vin

[bali motor]

Im do by AK90 never loss data, all type ews can read it... just clean mcu no need open mcu.
note: for 2D47J some times need external power..

caution in ews3-1 E39 with 2D47J.

[stalonerambo]

hi friend , how did you solve your problem,

[Rhysstrain]

With 2D47J do you desolder the MCU?

[lion0304]

Hi Bali
You said some time need external power, that for AK90 power or power on EWS? Because i see chinese said only for 1D47J if it can't read.

[bali motor]

Yes .. If im problem read.. Im install power on ews.. Will read it.. Im never failed read ews with ak90.

[lion0304]

Yes .. If im problem read.. Im install power on ews.. Will read it.. Im never failed read ews with ak90.

Hi Bali
I have an EWS 2, read out with Carpog no need external power (even for carprog). And i just received my AK90 but after clean several time, ak90 still show: Pin no touch. I already pull out pin 20 of MCu. Should i connect power to EWS? Please give me the pinout for EWS2. Thank you

[totalkey]

Hi Bali
I have an EWS 2, read out with Carpog no need external power (even for carprog). And i just received my AK90 but after clean several time, ak90 still show: Pin no touch. I already pull out pin 20 of MCu. Should i connect power to EWS? Please give me the pinout for EWS2. Thank you
Bali motor gave a power up pinout for it and it's worked for me, look at ak90 post
http://www.digital-kaos.co.uk/forums/showthread.php?p=2415404

[lion0304]

Bali motor gave a power up pinout for it and it's worked for me, look at ak90 post
http://www.digital-kaos.co.uk/forums/showthread.php?p=2415404

Thank you Totalkey and Bali Motor for help. I'll test