PDA

View Full Version : Clone Tuning Tool



AlexG40
13th October, 2014, 04:16 PM
Hello guys,

I would be grateful if you could give me some information about clone tools...

I was thinking buying clone tuning tool, a kess v2 or a galleto v54.

-What do you suggest me buying?
-Except from the lack of information from the company (because i will be not registered with the original tool), are they doing the same job like the original tool?
-Do you have any experience from this 2 tools?
-Is there any cheap original tuning tool?

2xded
13th October, 2014, 05:19 PM
1. Kess V2 and Ktag
2. lottery
3. How does this help you?
4. No
:joyous:

overs0ull
13th October, 2014, 05:28 PM
galleto 2 v54 euro clone is you right choise .

AlexG40
13th October, 2014, 06:26 PM
Thank you both guys for your replys

Please note that i am not going to self tune the maps, i'm going to buy tuned files, so i guess i need a slave tool right?
Do you have in mind any original tool less than 800 euros?

automocion
13th October, 2014, 07:10 PM
Cheapest original and with no anual fees its mpps.
Its a good tool. New worth 1500€ but you can find used one for 800-100€.

Br

betrescudan
13th October, 2014, 07:36 PM
Hello guys,

I would be grateful if you could give me some information about clone tools...

I was thinking buying clone tuning tool, a kess v2 or a galleto v54.

-What do you suggest me buying?
-Except from the lack of information from the company (because i will be not registered with the original tool), are they doing the same job like the original tool?
-Do you have any experience from this 2 tools?
-Is there any cheap original tuning tool?
must have all 3 clones...fgtech v5.4,kess v2.6,mpps 12 or 13...that means 300 euro...i use for orders the autoobd.it....fast,good tools and support

enigmauk
13th October, 2014, 09:42 PM
tunertool.com galletto v54 euro clone is all you need.

dont risk with china crap

TCSTigersClaw
14th October, 2014, 01:54 PM
Stick with original MPPS..........or your hair will grey

2xded
14th October, 2014, 06:15 PM
OFF
Nothing ventured, nothing gained!
What is the "original" in the "Clone Tuning Tool" topic.:smile:

AlexG40
15th October, 2014, 01:25 PM
I guess that i have to buy them all right?

betrescudan
15th October, 2014, 01:43 PM
tunertool.com galletto v54 euro clone is all you need.

dont risk with china crap
same shit with other face...did europe made chips?...you think that italians where is the mom" of tools like galetto and kess can accept a eu clone?...don"t be naive...same shit...clones after clones...

overs0ull
15th October, 2014, 02:53 PM
I can say i never have any problem with galleto EU clone - ANY problem , BDM work fine , can and k- line work great and EDC/MED 17 work perfect for now . I have and clone kess v2 1.89 and with some changes over it - work great over OBD via K and Can ,and MPPS v12 eu clone for 3 years never faild me on edc15 ,edc16 and Med and other ecus witch is in the list .
If we speak for a clone yes have a lot of sh*ts but have a stablle things witch do the job perfect for the money witch you pay for it - yes is not original but .... every one can choose by himself

tunertool
16th October, 2014, 12:13 AM
overs0ull... try looking inside a china clone and a euro clone... you will see the components inside are made by cheap chinese companies and are known to fail. if the quality of these components were so good why isnt the original tool using the same? obviously they want to reduce cost in manufacture process. its because they have a shorter lifespan... and when that component fails i hope its while writing to a ecu you can't fix :)