Opel 3.0cdti V6 denso ecu dpf off possible?

[budG60]

Can anybody dpf off an Opel V6 3.0cdti with Denso ecu?

[LaraVAG]

Its normal ECU to disable DPF, use swiftec, else do manualy, and you will need tech2 or OPCOM

[budG60]

Swiftec solution does not work. Anybody with experience with this car to manually dpf off?

Its normal ECU to disable DPF, use swiftec, else do manualy, and you will need tech2 or OPCOM

[gttuning]

Swiftec solution does not work. Anybody with experience with this car to manually dpf off?
swiftec works just you not do it right!

[LaraVAG]

swiftec works just you not do it right!

you have Right !!

[putopunto]

Hallo Guys!
i bought recently a program ecu safe 2.0.0. it can do a lot of things immo off ect ect.. for the ommo i understand it would be eeprom reading but for de dpf for example do you need a seperate interface to read dpf or is it located in the same eeprom as the immo

Thnx
ECU Safe is not a good tool in most times for DPF, and 2.0.0 lol you bought cracked one

[blackpirate]

hehe
get mpps v12 to read flash files
or galletto 2 etc

original or clone
:)

[putopunto]

yes, you read flash by tuning tool like kess V2 or Galletto , this example. I think on some ECU maybe EEPROM is need, but mostly no. ECU Safe can kills all DTC so not possible to see other problem once DPF is gone I think its a bad solution, better you pay a small amount to some tuner for good tested manual solution, then you can be safer.

[budG60]

I found a galletto 1260 is it good to read ecu en remap dpf with mpdified dump?
It is better to buy a FGtech Galletto V54.

[budG60]

swiftec works just you not do it right!
Swiftec does not work for all 3.0cdti Denso ecu's!

[smayer]

Swiftec does not work for all 3.0cdti Denso ecu's!

if you have swiftec and pay support they can help.